Philips Repair Tips

Search: philips
Results: 14231

Make	Model	Symptom	Problem	Solution	By
PHILIPS	21PT6456/78	Does not open vertically with red lines turns off r3470	Change without measuring		Eletrônica ramos
PHILIPS	21PT6456/78	Vertically closed at the top about 5 centimeters and turn off	Replace open resistor r3446	Replace is over	Eletrônica ramos
PHILIPS	FWM210	No audio and making crackles in the pre signal	Mosfet q502 buk7535 e ic501 tda7498l		Muniz eletrônica
PHILIPS	32PFL3404	Pisca led 3x	Q3, behind the plate.	Replace	Joaomvjr
PHILIPS	32PFL5604/78	TV turns on, suddenly beeps loudly, freezes the image and restarts	Ripple in tertiary feeding	Electrolytic c474 on the main board with altered capacitance. don't test! to replace	vapcomputadores
PHILIPS	21PT9467	3 colored line at the top of the screen	C352 with low capacitance, replace	Replace c352 100x50v	orlando lott
PHILIPS	20GL1340	No sound and no image, with a hiccuping noise when turning on	Damaged flyback	Replace flyback	andre_pinda
PHILIPS	14PT316A L9.2A	Doesn't start. totally dead.	Low power supply. around 20 volts. tsh short. but as it came from another workshop and was messing around, I don't know if the "mechanic" couldn't solve it and tried to complicate things more, or gave an exorbitant quote to justify his inability. because the TV was all messed up. at power supply, horizontally and vertically.	Power supply capacitor 2540 (100x25v) (located next to the power supply regulator), and 7402 (bu1508dx). I resoldered the vertical core, it was loose (some "mechanic" came by).	Eletrônica R-Tec
PHILIPS	32PFL3404	Dark screen	Screen does not light blue tcon LED	C1 shorted obs goes to v with (screen sign)	eliasom limeira
PHILIPS	32PHG4900	Doesn't start. without 12volts on the cn9101 connector. no LED on.	Diode d9112 sr5100 power supply board.	After changing it, the TV started working again.	Eduix
PHILIPS	29PT554	Turns on LED, has almost all voltages, but does not oscillate horizontally, has voltage on the TSH collector	7250 processor, defect caused by high voltage leakage from the fly.	Replace both.	Felix Tvsul
PHILIPS	29PT554	It doesn't turn on, the LED doesn't light up, tsound are no voltages.	Photocoupler, use original.	Attention, this model should be observed high voltage leakage of the fly, and the cause of the defects.	Felix Tvsul
PHILIPS	20PT324A	Doesn't start. The LED doesn't light up. low power supply pulsing.	Fly back short. ov2094b1. I used an ov2094/20662 and it was ok.		Carlão
PHILIPS	20PT123A/78	LED flickered and wouldn't turn on...sometimes it worked for a long time...	Solda fria no capacitor smd 2442	C2442 smd next to d6440	Irmão Daniel. .Mauriti ce
PHILIPS	DVP2850X/78	Doesn't start	L502 open	Replace it	Toinho Antenas
PHILIPS	25PT5536	Disarming immediately after image appears	Tube already weakened	Jumping the 5342 inductor, making the filament voltage increase, does not work in all cases, if the tube is very weakened, just replace it	davi.sls
PHILIPS	32PFL5604	The screen doesn't light up	Replace cs41,cs51 , ic10		speedtec
PHILIPS	29PT552A	It makes a ticking noise and does not oscillate, voltages are all normal.	Fly back ov2076 b2	Replacement	Eliel
PHILIPS	39PFL3008	Image flashing... 12vdc voltage that goes to the display board varying between 9.11 v	C119 leaking or open	Replace	Gam serviço Garanhuns PE
PHILIPS	FWM653X-78	Tsound is no sound	Without power supply +27v	R903,908 altered	speedtec