Samsung Repair Tips
Search: samsung
Results: 3801
Results: 3801
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SAMSUNG |
CI5079T SCT11D
|
Blue screen with no sound - menus partly off top of screen | Eeprom settings lost - with saa5290zp-026 set option byte to 5d, with-042 suffix eeprom set option byte to ca; still no signals present - pin 1 of micro s/c to chassis - new micro reqd | ||
| SAMSUNG |
CI5079T
|
Int width | Smr40200 ic in psu | ||
| SAMSUNG |
CI5079T
|
Field - top half missing | Fop chip tda8356 | ||
| SAMSUNG |
CI5079T
|
Fading pic | Dry joints crt base & rgb o/p ic faulty | ||
| SAMSUNG |
CI5079T
|
Dead - loptr 2sd5072 q401 failed | Replace the following: zd801, ic801, hc801, f801, l803, c803, c851, c852, q401 pt nos can be found in tv mag jul01 | ||
| SAMSUNG |
CI5079T
|
Dead - appears to be caused by high ht | 2 x 100µ 20v ht smoothing caps bulging, r2k overvolt prot diode s/c, also replace smr40200c chopper ic & his0169b hybrid chip & check audio o/p ic | ||
| SAMSUNG |
CI5070AN US60A
|
Int loss of sound & blank raster | D801 or 2 1n4003 12v reg supply diodes go hi res. | ||
| SAMSUNG |
CI5070AN US60A
|
Dead with whistle | All ht supplies appear correct but only 241v across mains rect as it was faulty | ||
| SAMSUNG |
CI5070AN US60A
|
Dark pic | D503 1n4003 diode hi res - check o/p from 12v reg ic802 - it may be low confirming faulty part | ||
| SAMSUNG |
CI5070AN
|
No line drive. ht 125v ok, but 15v supply to jungle ic low | C808 150uf 400v | ||
| SAMSUNG |
CI5070
|
No sound or vision, coming out of stby | D801 (measures ok) | ||
| SAMSUNG |
CI5061AT
|
Field collapse - int | Dry joints fop chip | ||
| SAMSUNG |
CI5061A
|
Sound has buzz/motorboating | C612 o/c | ||
| SAMSUNG |
CI5061 P68SA
|
Brightness varies | Q905 2sa539-y on crt base | ||
| SAMSUNG |
CI5061
|
Pic shifted to right | C404 2n7 & check r420 820k | ||
| SAMSUNG |
CI5052XT P68
|
No s/v , with sby light flickering | Sdh209b ic801 | ||
| SAMSUNG |
CI5052XT
|
St/by only | C852 470µ, c418 1µ 250v hi esr, q402 2sd 1651 (loptr) s/c, r826 1r ½w o/c- replace loptr with correct type (i didn't & it went s/c again 3 days later!) | ||
| SAMSUNG |
CI5052XT
|
No sound/vis with st/by led flickering | 125v ht only 70v; ic801 sdh209b | ||
| SAMSUNG |
CI5052XT
|
Hum bar | C851 100µ 400v mains smoother o/c | ||
| SAMSUNG |
CI5052X
|
St/by only | 86v ht, r813 o/c |