Samsung Repair Tips

Search: samsung
Results: 3847

Make	Model	Symptom	Problem
SAMSUNG	CI5013T P58SC	Stuck in stby no 12v or 16.5v	Micro 10mhz xtal us
SAMSUNG	CI5013T P58SC	Int no startup - stuck in standby.	100uf 25v & 100uf 16v next to tda4601 psu ic heat sink.
SAMSUNG	CI5013T P58S	No sound & sweep tuning won't stop	R709 27k which feeds ident signal to pin 29 of micro ric01 o/c
SAMSUNG	CI5013T P58S	Dead - q801 chopper tr reads s/c	Q801 ok as c816 2n2 1kv in parallel with it was s/c, r801 5r6 7w o/c
SAMSUNG	CI5013T P58S	Chans will tune but not store	Rr53 3k3 pull up res to eeprom chip hi res
SAMSUNG	CI5013T P58	Picture blanks in sound of text on pic returns af	27mhz xtal on text pcb
SAMSUNG	CI5013T P58	Hissing in st/by	C852 470µ 16v
SAMSUNG	CI5013T P58	Drifts off tune in 5 secs seek won't stop	R126 r116 ( 120k )
SAMSUNG	CI5013T	No startup - no stby light.	R811 100k pin 8 tda4600
SAMSUNG	CI5013T	Int loss of pic - sound & txt ok	27mhz xtal on txt board
SAMSUNG	CI5013T	Frame collapse.	R306 o/c.
SAMSUNG	CI5013T	Drifts off tune & won't stop in search	No afc i/p pin 9 ric01 micro - check res rr26 & r116 120k
SAMSUNG	CI5013T	Dead - no st/by led	R811 100k hi res
SAMSUNG	CI5013T	Chirping noise at sw on	C808 100µ 16v & c817 100µ 25v psu pri
SAMSUNG	CI50131T	Field collapse	R412 1r 1/2w safety o/c; ka2131 field chip; r305 20k o/c
SAMSUNG	CI5013	No sound	C605 22nf sc on pin 13 ic101
SAMSUNG	CI5013	Dead apart from noisy psu	C808 100µ 16v, c817 100µ 25v
SAMSUNG	CI5012Z P58SC	Sound absent	All volts around ic602 audio chip correct & replacement chip failed to cure - r617 220k (pins 3 & 4) o/c
SAMSUNG	CI5012Z P58SC	Bright white raster with fback lines	Dry joints on crt base though not obvious
SAMSUNG	CI5012Z	Tripping with ticking noise	Mains smoothing cap 100µ 400v