Search: samsung
Results: 3847
Make Model Symptom Problem Solution By
SAMSUNG CI347FA
Int blowing fuse. Replace 800ma with a 1at anti-surge type.
SAMSUNG CI340ZA
Int blowing fuse. Replace 800ma with a 1at anti-surge type.
SAMSUNG CI338Z
St/by only Ic003 µpd1987c faulty - no o/p from pin 6 to turn on tr to energise relay
SAMSUNG CI338Z
Int blowing fuse. Replace 800ma with a 1at anti-surge type.
SAMSUNG CI338Z
Dead. Mains transformer primary o/c.
SAMSUNG CI338Z
Dead - fuse gone. Uprate fuse to 1amp , r413 ( 1r ) , bu508df s/c.
SAMSUNG CI338Z
Chan display shows "88" but chan change ok Check tr805 & dz809 ( 5v supply pin 24 ic4 low)
SAMSUNG CI338XA
Int blowing fuse. Replace 800ma with a 1at anti-surge type.
SAMSUNG CI338X P50
Tuning drift - sudden & erratic Cracks around connector sn01
SAMSUNG CI338X P50
Tuning drift Crack around connector sno1 from remote panel
SAMSUNG CI338GA
Int blowing fuse. Replace 800ma with a 1at anti-surge type.
SAMSUNG CI338GA
Dist sound R614 o/c; r601 2k7 hi res
SAMSUNG CI338F
No col when warm Zd501 leaky
SAMSUNG CI338 P50
Very erratic and sudden tuning drift affected by mo Check for crack arouind pin 1 of screened connector sn01
SAMSUNG CI338
Int sound Dry joints ic101 la7520 if chip
SAMSUNG CI338
Dead. R413 (1k), bu508.
SAMSUNG CI3373Z SCT11B/D
Service mode access Stby/p.std/help/sleep/power on. controls vol +/- channel +/- exit with status,{all on r/c}
SAMSUNG CI3373Z
Field coll & poss no sound aft storm Micro faulty (£40)
SAMSUNG CI3373Z
Dead 3.15a fuse o/c; ic801 smr40200 s/c; dz801 r2kn s/c; l801 39mh damaged also hc801 his0169b hybrid ic
SAMSUNG CI3373 SCT13B
Dead - led flashes every 2 seconds Dry joint coll loptr - not obvious to see