Sanyo Repair Tips
Search: sanyo
Results: 852
Results: 852
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
TV SANYO |
CTP-6791 P
|
Defect: does not turn on or off immediately | Solution: it doesn't turn on and when it turns on it immediately turns off, several cold welds | BF.COLATINO | |
SANYO |
CTP 6792
|
Vertical closed | Capacitor 513 1/50 with capacitance of 200n-changed (solved) | manuel |
|
SANYO |
CTP
|
Vertical with llinierity at the top of the screen | Electrolytic capacitor 1x5o 513 | This goes to pin 6 of the ci and just replace it and run for hug | atonio |
SANYO |
CTP-3791P
|
Color image without affecting programming | Profit | Replace it | gbseletronica recife |
SANYO |
C28SW3TX
PT90 ? |
Image. gear-shutter effect | Cp13 ... power supply | tvluso | |
SANYO |
CTP 3792
|
TV does not turn on LED is off and accumulating voltage in the power supply capacitor | Transistor q686 at the power supply, fully shorted | Replaced q686 tv is ok | afonso, taquari eletronica |
SANYO |
CTP6791P
|
Poor color and purple line in the vertical direction. | Ic 271 lc89950 replace | @gepê | |
SANYO |
CTP6791P
|
Hoarse sound | F641 changed (replace) also check the sound filter 4.5 | @gepê | |
SANYO |
CTP6791P
|
Vertical reduced at the bottom and stretched at the top | C513 1mx50v replace | @gepê | |
SANYO |
CTP6791P
|
Vertical closed | R516 open (change) | @gepê | |
SANYO |
CTP6791-P
|
Dark colored stain on the screen | I exited the focus socket defect screen | MARCOS DE UBATUBA | |
SANYO |
CTP3791S
LA3- A14F3ABS |
No sound and no noise at all | Output la4285 and open coil f641 | When changing it, the sound didn't come out because the 16v power supply was missing and one coil was open. Checking the other outlet, I found that it was really bad. | serginhosond@yahoo |
SANYO |
33LJ/29LH43
|
Osd ñ it seems | R 544 de27k next to the 39k resistor that feeds the varicap's 33v. | Noun. the same | @gepê |
SANYO |
6791P
|
High power supply | Diode 614 defect resolved | sinezio libano
|
|
SANYO |
CTP 6791
|
Does not turn on, completely dead power supply | R 620 and r 621 both 120k open | After the replacement, the TV worked normally | CARLOS |
SANYO |
CTP6781T
|
Shaking image | Cap 103k, localizado no pino 3 do ic 451(c454) | Replace c454 | fernandocamarques |
SANYO |
CE28SW4 PT90
PT90 |
Extremely high screen voltage, cannot be adjusted on the transformer | Rd008 open and icv2 short | Replace rd008 10r, and icv2 stv5112, and check diode dd05 | |
SANYO |
CE28SW4
PT90A |
Extremely high screen voltage, cannot be adjusted on the transformer | Rd008 open and icv2 short | Replace rd008 10r, and icv2 stv5112, and check diode dd05 | |
SANYO |
C-3792
|
Time it turns on time it doesn't turn on when it turns on it turns off and stays in stand bay | Cold welding on fly back and baffle | Resolder | eletroclaudio aguas belas |
SANYO |
C-3792
|
TV. michida .white screen no video | Tripote vf191agc and o sw191 service----- normal | Regulates agc and the service key turns to normal | eletroclaudio aguas belas |