Sanyo Repair Tips
Search: sanyo
Results: 852
Results: 852
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SANYO |
CE14AT2
|
When turned on, the LED flashes 4x and returns to stand-by. | R869 470k ¼ w. | ||
| SANYO |
CEP6024PG CHASSI A3-A
|
White screen, with wavy vertical stripes (perfect sound) | C562 22mf/250v without capacity | ||
| SANYO |
C-1471 -CH EC-1LC96
|
Without image, but with/grain | Substituir r200 (6k8 1/2 w), no circuito agc | ||
| SANYO |
C20DN4AVN
|
Without video, cathodes (rgb) with about 4v - it doesn't get dark if you download g2 (screen) | Open 220k r211 | ||
| SANYO |
CTP6262E
|
Destroys the transistor q801 (2sd1571=but11af) of the power supply. | Q802 (2sc3225) aberto. | ||
| SANYO |
C1471 CHASSIS 2094 OU 14''1LC96
|
It doesn't start, it doesn't come out of standby, when you press p+, the LED dims and returns to standby. | The 150k r858 is interrupted, this component is on the +115v circuit and in turn connects to the standby control. | ||
| SANYO |
C1471A
|
The TV starts to start, but then goes to stand-by, with the LED blinking continuously | Substituir r859 680k | ||
| SANYO |
CE28GNI CHASSI EB5A
|
No tuner image crackling and negative image | Fault l201 stops intermittent | ||
| SANYO |
20BG1TX
|
Systematically destroys q1 (p3n90fi) at the power supply | Substituir r4 (270k) | ||
| SANYO |
CEP-6022 CH A3-A20
|
Image with/scratches, like wood grain | Cnd c562 22yf/250v - filtering power supply video circuits | ||
| SANYO |
CE14A2
EC7 |
Does not go to standby | Avl option active. | Enter the menu and deactivate the avl option. | Duartes |
| SANYO |
C20BG2TXN
PT11 |
The TV does not come out of stand by | R9-47r, e c31-220uf/16v. | ZAGOR | |
| SANYO |
CTP-6781
|
Brilliant list of approx. 3 cm in the center of the canvas and from tsound to the top stretched image | C451 (470mf x 16v)e c455 (1mf x 50v) | ||
| SANYO |
CTP-6791 P
|
White screen, appears and disappears (blinks) | To be clear | ||
| SANYO |
CTP-3720
|
No video with color | R435 | ||
| SANYO |
CTP-6791
|
Vertical blue line on screen | Check non-ic chroma welds | ||
| SANYO |
CTP 6791
|
Dead | R620 120k-1/2w also check r621 | ||
| SANYO |
CE28WN4B
|
Procedure to disable protection mode for fault finding | The protection mode can temporarily be disabled to prevent the set going into standby during fault finding by disconnecting r648 note: safety procedures must be followed !! | ||
| SANYO |
CBP2580
|
The word "factory" in a red box is permanently displayed on screen and sound volume goes from 0% to 50% to 100% | Enter service mode, go down to nvm and press volume plus on remote | ||
| SANYO |
21BN1
|
Dead, l.e.d. lit | R620 o/c. r621 and r620 replaced both 120k |