Sanyo Repair Tips
Search: sanyo
Results: 852
Results: 852
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SANYO |
VHR-796E
|
Dead | Pr512 in the psu was o/c | ||
| SANYO |
C25EG95B EC3-A25
|
Dead set no start up | Replace r321 120k | ||
| SANYO |
CE32WP2 WB2-A32
|
Dead set, standby l.e.d lit | Check capacitor c634 2n2, 2kv in power supply for o/c or s/c | ||
| SANYO |
AVM1902 G4S-19020
|
Intermittent horizontal deflection | Resoldered the pins of horizontal deflection transformer | ||
| SANYO |
VHR287E
|
Cuts out on record and clock blinks out other wise ok | Replace pr512 js130 light brown 1000 on side near front of psu next to q5103 | ||
| SANYO |
VHR766
|
Completely dead, no display | Reg ic511 faulty l5431. replaced solved all problems | ||
| SANYO |
CEP2190M
|
No sound | Ic901 tda4935 blown due to excessive supply voltage, capacitors c619, c623, c810, c600, c601, c859 defective. also verify r822 | ||
| SANYO |
CEP3011V-30 A1-B14
|
After switching on, no longer able to switch-off with remote control, standby light comes on with sound muted. original remote control: rm-700 | Opto-coupler pc113 faulty | ||
| SANYO |
SPECTRA 2000
|
Picture had only wide screen effect | Found set on the street ! beautiful little 14" tv, still looks like new, replaced 33uf, 160v cap in power circuit as it was bleeding its guts onto the pcb, has worked perfectly ever since ! | ||
| SANYO |
VHR776E
|
Dead | Check and replace pr512 which is located towards the front right hand side | ||
| SANYO |
CTP-3771
|
High power supply | R552 changed | ||
| SANYO |
CTP-3792
|
Dark stripe on the right side | Diodo zener-d351-15v | ||
| SANYO |
CTP6755
|
Half dark image | R 407 of 100k open | japa | |
| SANYO |
CTP3790
|
Missing about 3cm on the left side of the screen | D351 with problem | I replaced it and the TV was great | osvaldo |
| SANYO |
CHASSIS PT11
|
Won't start | In standby correct voltages at start-up the +b voltage drops to 65v | Replace c25 47μF 160v | Ruyzovich |
| SANYO |
CTP 6771
|
It doesn't turn on, it just lights up the LED | Change channel and volume buttons, without testing | preá-rs | |
| SANYO |
CTP 3781
|
Bad channel sound, w/ hiss, (normal av) | Change crystal x 161 . Note: you can put 3 terminals, just fold the middle terminal and it will be ok. | ESPER | |
| SANYO |
CTP3791P
|
Distorted image and reduced frame. | Reduced picture due to c614 having its capacitance altered, causing the power supply to be low and not regulating, the image distorted due to the internal capacitor of the coil l171 being altered, removing the coil from its place and breaking its internal capacitor and placing a of 82pf under the plate. | Replace c614 and remove the internal capacitor from l171 and make a small adjustment to the core | CALIXSERVICE |
| SANYO |
CTP6791P
|
Doesn't start | 130v power supply with only 19v, after carrying out all primary and secondary checks, it was found that the q686 was leaking, meaning there was no power supply reference. | Replaced the same, everything went back to normal | CALIXSERVICE |
| SANYO |
VARIOS
|
Hoarse sound in vhf; normal in av | Adjust the sound coil | Ademar / Videira sc |