☰

Sanyo Repair Tips




AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: sanyo
Results: 853
Make Model Symptom Problem Solution By
SANYO 21M1-C21EF90
The TV starts up, immediately switching to stand-by Replace r372 (390k)
SANYO CEP3024
No vhf, tuner o.k, c.i = la7910 o.k replaced several times Blackmailing pins 2 to 8 of the same la7910 was ok (defective UPC?)
SANYO CHASSI 2084 _EB 2B
Does not start. forcing the start causes the video to be blocked Q703 with escape.see tv.q65 2 and 654 and d704
SANYO C21EF50 CHASSI EC3A
When connecting it drops to st/by Sub c469 = 10uf
SANYO CE28WA2 CHASSIS EB5W
Green and red streaks appear in dark background images Pino 39 do ic tda8843 cond 416 100n
SANYO C20DN4AVN CHASSI PT11
R3 68k; r4 270k; tda4605 ; 2sk1118
SANYO CHASSI 2088
Little vert amplitude. and folded at the bottom R707 18k 0.12w changed with 56 k
SANYO C20DN4AVN
It has sound, but no ht. Replace drive transistor bf422 (apparently good) with a more powerful one.
SANYO C20BG2TXN - CHASSIS PT92
Off Rp05-1m in power supply
SANYO CEP1497 CHASSIS EC1 2078
Tries to start and goes to standby - no vertical Tda8361 broken and r718 open
SANYO CEP3024PG, CEP3037PG
R555 47k 1/ou >> 1o, e/ou r552 100k 1/4o >> 1/o
SANYO CE14AT2 CHASSIS 2112 / EC7A
Remains on standby - LED flashes 4 times. R869 (470k) open on the power supply secondary. Note: It could also be problems with the horizontal deflection block.
SANYO CE14AT2 CHASSIS 2112 / EC7A
Remains on standby - LED flashes twice. Check/change ic701 (la7840).
SANYO CEP2596 CHASSIS 2031
After some time (10-20min.) in operation, the diode d850 by299 short-circuits, subsequently destroying the q800 buz90a. Replace transformer chopper t800 hr7436
SANYO CEP2596 CHASSIS 2031
It doesn't work, blown fuse, the buz90a transistor is short-circuited, after replacing it and checking all components in the power supply, it short-circuits again. See the diode d850 by299 which is on the +150v circuit, it may be short-circuited.
SANYO C14TXR CHASSI PT90
Shorted power supply power transistor Cond. 680pf smd no pino 2 do ci com fuga
SANYO CE14AT2
Is in protection mode, how can I inhibit it? Protection inhibition: press the following keys simultaneously: the p+ key and the m (memory) key, keeping them pressed, the television switch turns on.
SANYO CE14AT2
TV doesn't start, LED blinks 4 times See the output lines, transformer, transistor, baffles.
SANYO CE14AT2 3
TV does not start, LED flashes three times and is in protection. See the vertical output circuit, ic 701 to 7840. in this very specific case, tsound were leaks from the transformer lines to the deflector coil wires.
SANYO C14AT2
The/ image. with/ sound. w/ cd Resistance 682 open