Sanyo Repair Tips
Search: sanyo
Results: 852
Results: 852
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SANYO |
C-29LH43B
|
Doesn't work on vhf | Check the 39k r-505 of the 33volts that powers the channel selector is close to the horizontal heatsink | Ademar / Videira sc | |
| SANYO |
CTP3791S
|
Does not turn on there is no voltage on all secondary outputs | Resistors r620 and r621 of 120k, one was open and the other was changed giving 140k | After the replace, the TV started working normally again | JOSÉ GUSMÃO |
| SANYO |
C 20BG 2TXN
99TA0015J (PT92) |
LED does not start on correct secondary voltages | Wd-01(horizotal driver) burnt out | cwuam | |
| SANYO |
C29LH43B
|
Stand by on when pressed, turns off and back on, does not start | Photo coupler | edezio eletronica | |
| SANYO |
CT3791
|
TV with low sound going mute looking like broken printing | R 132 330 r e r 133 3k3 ambas smd | You replaced two and ran for the hug, thanks | Pezovisk |
| SANYO |
CTP-3771
|
Nothing works, but the stand bay light stays on | There was no voltage at all at the t511 secondary output. | Changing the photo coupler. | LOU |
| SANYO |
C29LH43
|
Hoarse sound on one or both channels. | C1408 and c1410 with broken terminals. | To replace. | @gepê |
| SANYO |
CTP 6792
|
LED is on and won't turn on | Exchange 1906, short | BARRETO CRUZ | |
| SANYO |
CTP 3791 P
|
High power supply, serca de 240 v | Optical coupler q611 changed. | Replace the same | JB Ramos |
| SANYO |
C29LH43B
|
Vertical closed | Bad contact d476, pin 3 flyback, see tv br 476, misleading defect, not c.i. no capacitors | Replace d476 | |
| SANYO |
CTP 3792
|
Vertical closed top and bottom with black lines tv works normally | C513 1mf for 50v was just a quick change. s.vertical | JN ELET. NEVES | |
| SANYO LCD |
CE32LC4
|
Tries to get by and turns to standby | Leak in q656 next to the two relays | Marcio Santos | |
| SANYO |
C29LH43B
|
TV does not come out of standby | R1310 the 120k | Replace the same | eletronicaapolo |
| SANYO |
CTP3791P
|
Does not turn on showing 20v on the horizontal output collector | Q686 | Replace | eletronicandn |
| SANYO |
CTP6781P
|
ONLY tunes to uhf channels | Defective microprocessor | Replace | ROBERTO |
| SANYO |
C33LJ13B
|
Has no characters | Vc 531 | Adjust, possible dirt on the variable capacitor. | lou |
| SANYO |
CTP-29LH43
|
The LED stays on when starting the relay arms and disarms | Resistor 1313 120k e o resistor 1310 120k | Wislen Alves | |
| SANYO |
11AK30
11AK30 |
No high voltage, there is sound, there is no horizontal signal at the base of the bu808 with everything connected | See c619 100nf. 250v is dry | Replace c619 | PINGO |
| SANYO |
CE21FNS5
11AK30 |
Without high voltage, it has sound | See c 619 100nf 250v dry, there seems to be no horizontal signal | PINGO | |
| SANYO |
C20DN4AVN
PT92 |
High screen voltage, no adjustment on the line transformer | Open rd12 (next to the line transformer) | electro-guimarães |