Sony Repair Tips

Search: sony
Results: 20073

Make	Model	Symptom	Problem
SONY	AE1C	Wont tune	Check 05 ( 10k )
SONY	AE1C	Various inc shimmering osg, int vol, blank raster with high pitched squeal from speakers	Dry joints ic604 & d612 - hidden by plastic strut
SONY	AE1C	Top field foldover	C632 100µ
SONY	AE1C	St/by only - comes on eventually with no pic	Sandcastle signal at pin 11 ic501 tea2028b distorted - chip u/s
SONY	AE1C	Sound on vision at high volume levels	Normal
SONY	AE1C	Sound low	D271 13v zener o/c
SONY	AE1C	Sound has loud background noise - pic ok	T181 sm tranny on a board
SONY	AE1C	Sound goes tofull vol when adjusted	Eeprom ic005 sda2546
SONY	AE1C	Poor starting	C605 & 617
SONY	AE1C	Pic int col and blanks out int	Dry joints on vid process vert pcb - earth lands of screening can
SONY	AE1C	Pic flicks from colour to b/w	5v supply on b board missing circuit protector o/c
SONY	AE1C	Pic cuts out aft 5 mins with click from spkrs	Ok in st/by ic604 7605 5v reg
SONY	AE1C	No tuning memory	Replace eprom ic005, sda2546 (24c08 will do).
SONY	AE1C	Intermittent colour	Ct332 cap preset osc pt no 114141821
SONY	AE1C	Int. right channel	Ic261 pin4 dry
SONY	AE1C	Int start up	Check caps c605, 608, 611 & 617
SONY	AE1C	Int rolls , goes b+w , line twitches	Dry joints inside can on digital video panel
SONY	AE1C	Int micro lockup, child lock & sigs	Dry joints connector of eeprom daughter board
SONY	AE1C	Int colour	Tda4510 decoder chip replaced & set up ref osc by s/c pin 11 of chip to chassis & adj c332 for stationary pic
SONY	AE1C	Int colour	Tc1 on video pcb dry . check screening cans etc for drys also