Sony Repair Tips
Search: sony
Results: 20105
Results: 20105
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
CDPC665
|
Drawer won't open - secured loose sensor board | Drawer won't open, carousel jammed over disc table. foundsensor board was never screwed down. board came loose and jammed mech,damaged components. | ||
| SONY |
CDPC545
|
Tray motor spinning backwards - replace table motor | Ran into this problem 5 times in past 3 weeks. removed traymotor. old motor is installed with lable on motor facing up. if newmotor is installed with label facing up, motor will spin backwards andtray will not function properly. | ||
| SONY |
CDPC535
|
Tray motor spinning backwards - replace table motor | Ran into this problem 5 times in past 3 weeks. removed traymotor. old motor is installed with lable on motor facing up. if newmotor is installed with label facing up, motor will spin backwards andtray will not function properly. | ||
| SONY |
CDPC445
|
Tray motor spinning backwards - replace table motor | Ran into this problem 5 times in past 3 weeks. removed traymotor. old motor is installed with lable on motor facing up. if newmotor is installed with label facing up, motor will spin backwards andtray will not function properly. | ||
| SONY |
CDPC435
|
Tray motor spinning backwards - replace table motor | Ran into this problem 5 times in past 3 weeks. removed traymotor. old motor is installed with lable on motor facing up. if newmotor is installed with label facing up, motor will spin backwards andtray will not function properly. | ||
| SONY |
CDPC345
|
Tray motor spinning backwards - replace table motor | Ran into this problem 5 times in past 3 weeks. removed traymotor. old motor is installed with lable on motor facing up. if newmotor is installed with lable facing up, motor will spin backwards andtray will not function properly. | ||
| SONY |
CDPC345
|
Cd drawer takes minutes to open - replaced ic451 | Drawer took several minutes to open. found drawer would spinendlessly. | ||
| SONY |
CDPC245
|
Tray motor spinning backwards - replace table motor | Ran into this problem 5 times in past 3 weeks. removed traymotor. old motor is installed with lable on motor facing up. if newmotor is installed with label facing up, motor will spin backwards andtray will not function properly. | ||
| SONY |
CDPC245
|
Disc table won't stop - replaced m801 | Disc table rotates continuously and cd player won't' detect discs. replaced flex cable and checked d801 sensor, player is still doing same thing. | ||
| SONY |
CDPC235
|
Tray motor spinning backwards - replace table motor | Ran into this problem 5 times in past 3 weeks. removed traymotor. old motor is installed with lable on motor facing up. if newmotor is installed with label facing up, motor will spin backwards andtray will not function properly. | ||
| SONY |
XRU330
|
Unit will not turn on (replaced leaky d202 and d203) | Unit will accept the tape and play but once turned off can notturn it on. | ||
| SONY |
XRU220
|
Unit will not turn on (replaced leaky d202 and d203) | Unit will accept the tape and play but once turned off can notturn it on. | ||
| SONY |
XRC720
|
No audio (found audio amp ic781 defective) | No audio. found audio amp ic781 defective. -hq comments: tokyo has analyzed samples we sent them and havedetermined that the defects are ususally caused by excessive reversevoltage being applied to the ic, probably by the power antenna relayturning off | ||
| SONY |
XRC620
|
No audio (found audio amp ic781 defective) | No audio. found audio amp ic781 defective. -hq comments: tokyo has analyzed samples we sent them and havedetermined that the defects are ususally caused by excessive reversevoltage being applied to the ic, probably by the power antenna relayturning off | ||
| SONY |
XRC610
|
No audio (found audio amp ic781 defective) | No audio. found audio amp ic781 defective. -hq comments: tokyo has analyzed samples we sent them and havedetermined that the defects are ususally caused by excessive reversevoltage being applied to the ic, probably by the power antenna relayturning off | ||
| SONY |
XRC520
|
No audio (found audio amp ic901 defective) | No audio. found audio amp ic901 defective. -hq comments: tokyo has analyzed samples we sent them and havedetermined that the defects are ususally caused by excessive reversevoltage being applied to the ic, probably by the power antenna relayturning off | ||
| SONY |
XRC410
|
No audio (found audio amp ic901 defective) | No audio. found audio amp ic901 defective. -hq comments: tokyo has analyzed samples we sent them and havedetermined that the defects are ususally caused by excessive reversevoltage being applied to the ic, probably by the power antenna relayturning off | ||
| SONY |
XRC210
|
No audio (found audio amp ic901 defective) | No audio. found audio amp ic901 defective. -hq comments: tokyo has analyzed samples we sent them and havedetermined that the defects are ususally caused by excessive reversevoltage being applied to the ic, probably by the power antenna relayturning off | ||
| SONY |
XRC190
|
No audio (found audio amp ic901 defective) | No audio. found audio amp ic901 defective. -hq comments: tokyo has analyzed samples we sent them and havedetermined that the defects are ususally caused by excessive reversevoltage being applied to the ic, probably by the power antenna relayturning off | ||
| SONY |
XR6450
|
No audio (found audio amp ic901 defective) | No audio. found audio amp ic901 defective. -hq comments: tokyo has analyzed samples we sent them and havedetermined that the defects are ususally caused by excessive reversevoltage being applied to the ic, probably by the power antenna relayturning off |