Sony Repair Tips
Search: sony
Results: 20100
Results: 20100
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
KV27HSR10
|
No sync or color, replaced c338 | No sync or color trace video signal to c338. | ||
| SONY |
KV13TR28
|
Tv shuts off by itself, replaced fbt | Tv on one second then shuts off. | ||
| SONY |
KV13TR28
|
Intermittent pix, solder splash on tuner | Unit displayed various symptoms, blanked no pix, no vertsweep horiz line across screen, full raster snow no tuning. tappingtuner w/screwdriver would cause sympt. r681 overheating, tuner 5 voltssometimes missing. | ||
| SONY |
KV1397R
|
No audio, see service bulletin 291r2 | This unit had no audio. the collector resistor for q252 wasopen although it does not show a resistor number in the schematic. it ismarked r255 on the board. | ||
| SONY |
KP61XBR28
|
Anode lead assembly, not sold separately | Service manual lists the anode lead ref 128 as p/n1-559-865-41. it is not available. -hq comments: this lead comes with the crt. it was mistakenlylisted in the part list. it is not available as a separate part. this was covered in correcti | ||
| SONY |
KP53XBR25
|
Anode lead assembly, not sold separately | Service manual lists the anode lead ref 128 as p/n1-559-865-41. it is not available. -hq comments: this lead comes with the crt. it was mistakenlylisted in the part list. it is not available as a separate part. this was covered in correcti | ||
| SONY |
KP46XBR35
|
Dead set, replaced ic1704 and holding clip | Set came in dead. while troubleshooting the unit, it wasnoticed that the clips holding ic1704 were missing, and the ic wasnot touching the heat sink. the ic was found to be shorted. | ||
| SONY |
KP46XBR25
|
Anode lead assembly, not sold separately | Service manual lists the anode lead ref 128 as p/n1-559-865-41. it is not available. -hq comments: this lead comes with the crt. it was mistakenlylisted in the part list. it is not available as a separate part. this was covered in correcti | ||
| SONY |
FDL-K400
|
Rubber added to stand, see correction 1 | Rubber piece added to stand. please refer to service manual correction 1. part number for rubber piece 4-033-485-01 | ||
| SONY |
ITD20
|
Part # of 4 pin line jack base 1-580-143-11 | Ordered 4 pin line jack from kc. got mistagged 4 pinhandset cord jack instead. tried reordering with same result. handsetjack arrives with the part # of the base line jack on its tag. when iorder the handset jack under its own real part 157300711, i | ||
| SONY |
ITA850
|
Pn for switches s10 and s11 on ic board | Currently, switches are not available except as part of the icboard.-hq comments: unfortunately these switches are not available separately asthe ic board has a relatively small number of components. | ||
| SONY |
ITA750
|
Pn for switches s10 and s11 on ic board | Currently, switches are not available except as part of the icboard.-hq comments: unfortunately these switches are not available separately asthe ic board has a relatively small number of components. | ||
| SONY |
CMH333
|
Intermittent power | Unit has no power. squeeze bottom of unit, power comes on. | ||
| SONY |
MDP800
|
Tray door won't open | Door won't open, just keeps flashing close on led displaywhen powered up. | ||
| SONY |
MDP500
|
Wrong ref no ic402 & ic405 switched | Ordered ic402 875205679 cxa1632q7 assuming 875904830la6510l70. ref no ic402 & ic405 were switched. | ||
| SONY |
MDP500
|
No initialization | Unit would shut down after 10 to 15 seconds. | ||
| SONY |
MDP500
|
Shuts down after 10 to 15 seconds | Unit would shut down after 10 to 15 second. | ||
| SONY |
TCWR590
|
Dead - replaced ic801 | Dead one or two segments on display lit very dim. replace cpu ref # ic801. | ||
| SONY |
TCWR535
|
Unit has no display, no function - repl ic801 | Unit has no display and no functions. main board ic801 pin71 lost -24.3v regulator. desoldered and lifted pin 71, 24.3v returnedto the line. ic801 defective caused no display. | ||
| SONY |
TCFX211
|
Capstan retaining ring |