Sony Repair Tips
Search: sony
Results: 20100
Results: 20100
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
SONY |
KV1926R
|
Radio interference, see sb ctv0288r | The picture remains free of interference, but the sound ispicking up the transmission. even with the unit turned off, the sound isstill there. the customer has an amateur radio station. | ||
SONY |
KV1975R
|
Radio interference, see sb ctv0288r | The picture remains free of interference, but the sound ispicking up the transmission. even with the unit turned off, the sound isstill there. the customer has an amateur radio station. | ||
SONY |
SLV70HF
|
Extra screen characters which change locations | When the unit is turned on, eight large zeros appear in thelower right corner of the screen. the zeros intermittently move to thetop left and reduce to 1/3 size. after the correct character data is dis-played, the zeros return and blink at variable spe | ||
SONY |
EDV55
|
Excessive drop out | Excessive drop out on all recordings. | ||
SONY |
EDC55
|
Excessive drop out | Excessive drop out on all recordings. | ||
SONY |
KV2090R
|
Bezel assembly no longer available | There are no bezel assemblies available in kansas city. thescreen comes up as (no longer available). | ||
SONY |
CCDF40
|
Rolling characters in view finder | Vertical rolling characters in the view finder and inter-mittently on the e-e video. check v ref. going into/coming from ic-366,and pin 13 of ic-367. if this signal is lost, the character will be dis-played on the monitor and will roll top to bottom. | ||
SONY |
BMC550
|
Unit loads and unloads, but does not record | The unit will load and unload tape. on loading, the drumspins for about one second, then the unit shuts down. | ||
SONY |
WMF57
|
Missing part number for ic-302 | The part number for ic-302 is missing in the service manual. -hq comments: the part number is 8-759-701-07. | ||
SONY |
UP811
|
Thermal paper storage temperature/humidity range | What are the temperature and humidity ranges for storing theupp-110s thermal printing paper? | ||
SONY |
CCDF70
|
Noise in slow motion | Slow motion is o.k. for about 15 seconds, then noise appearsat the top and bottom of the screen. still adjust does not seem to work.(3 units). -hq comments: we experienced the same effect on our lab unit. pleasehold the still adjust down in the direct | ||
SONY |
ITA850
|
Transfer function - beeper will not display number | |||
SONY |
ITA850
|
Transfer function - beeper will not display number | Customer has it-a850 set up to transfer his calls to hispager/beeper service. customer has display on beeper which shows whatnumber he was called from ie., who had originally called pager phone no.when it-a850 transfers to pager company, customer gets n | ||
SONY |
ITA750
|
Transfer function - beeper will not display number | |||
SONY |
ITA750
|
Transfer function - beeper will not display number | Customer has it-a750 set up to transfer his calls to hispager/beeper service. customer has display on beeper which shows whatnumber he was called from ie., who had originally called pager phone no.when it-a750 transfers to pager company, customer gets n | ||
SONY |
ITA650
|
Transfer function - beeper will not display number | |||
SONY |
ITA650
|
Transfer function - beeper will not display number | Customer has it-a650 set up to transfer his calls to hispager/beeper service. customer has display on beeper which shows whatnumber he was called from ie., who had originally called pager phone no.when it-a650 transfers to pager company, customer gets n | ||
SONY |
ITA600
|
Transfer function - beeper will not display number | |||
SONY |
ITA600
|
Transfer function - beeper will not display number | Customer has it-a600 set up to transfer his calls to hispager/beeper service. customer has display on beeper which shows whatnumber he was called from ie., who had originally called pager phone no.when it-a600 transfers to pager company, customer gets n | ||
SONY |
ITA550
|
Transfer function - beeper will not display number | Customer has it-a550 set up to transfer his calls to hispager/beeper service. customer has display on beeper which shows whatnumber he was called from ie., who had originally called pager phone no.when it-a550 transfers to pager company, customer gets n |