Sony Repair Tips
Search: sony
Results: 20073
Results: 20073
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
SONY |
SL2000
|
No operation | Unit would thread w/o cassette. threading motor would notturn off at threading end. commands (play, etc) were accepted (led wouldlight) but no operation. after 8 sec unit would go into shutdown, witheject light on. servicer had previously replaced ic | ||
SONY |
LC710
|
Need p/n for strap and battery holder | We need p/n of shoulder strap and battery holder used in thebetamovie system case. -hq comments: these parts are not available separately. sales has afew extra parts which i will send to you. | ||
SONY |
XR740
|
Eject malfunction | I have received six or so xr740/780compartment. on none of them could i find a defect. after unjamming tapeand resetting the mechanism, all functions are okay. it seems that thewhite cam gear (#383) hangs up while moving the power plate assy (#371)for | ||
SONY |
KV25XBR
|
Poor vertical locking | Good pix and sync with network broadcast, but with vcr output,poor vertical lock, intmt blanking of pix. found reduced amplitude ofcomp. video at output of u board (u-10). signal reduced by 1/3 between band e of q822 buffer, but q822 ok. | ||
SONY |
CCDV8
|
Color distorted | Two units same week. i think this is part of master osc.giving color problem. ic708, cp-9 bd (sync gen) also replaced. | ||
SONY |
WMF10II
|
Correct p/n - stopper, retainer | Request correct p/n for above ref #, manual incorrect. -hq comments: items #9 & #10 are reversed on the exploded view. there-fore, item #9 on the part # list (p/n 3-315-929-31 ornament (b) reel) isthe one you are requesting. see tape recorder s/b #19 | ||
SONY |
STRVX750
|
Intermittent memory, wrong memory in present, no output | 1) intmt loss of memory @ powered 2) occasionally a stationnumber would show up @ turn on that was not in preprogrammed memory andhad not previously been selected 3) fm high/low switch inoperative 4)@ turn on, unit had no output until a button (any on | ||
SONY |
CPD1310
|
No video | Circuit board broken on b board underneath of cnj401 alltraces broken. this is the second set with the same symptoms, and alsod416, 417, 418 went bad. | ||
SONY |
FD40A
|
Poor vertical sync, replaced ic201 | Poor vertical sync on tv operation. a/v input ok. found weakvideo signal at cf201, but dc voltages checked ok on ic201. | ||
SONY |
KV1972R
|
No high voltage, replace hdt and flyback | Set would come on without pressing power button. no high vol-tage. blew c540. measured 500v d507 192v line. changed flyback. sameproblem, again. blew c540. incorrect waveform at base of q502. changedhorizontal drive transformer. set came on and | ||
SONY |
STRAV360
|
No fm/am | Unit came from dealer with no fm or am. first found crystalbad. replacing crystal restored am but still no fm. data transfer toic204 looked good. checked pin 11 ic204 and found no fm reference.q103 local osc transistor was checked and found good yet | ||
SONY |
CFSD7
|
Unknown part | No part number for lever holder located in 4b on page 54. -hq comments: the part number for the lever is 3-563-469-00. | ||
SONY |
SLHF900
|
Modification to include flying erase head | Industrial model, gcs-50 contains flying erase head forediting. customer would like to modify his sl-hf900 to include samecircuitry. is this possible? -hq comments: no gcs-50 contain completely different boards thansl-hf900, including if-11 board whic | ||
SONY |
CCDM8U
|
Part number for fp-10 flex connector | S/m does not show p/n. please inform. -hq comments: p/n is a-7070-149-a. | ||
SONY |
RS20
|
Missing p/n - flywheel | Missing part number on page 28 ref #300. -hq comments: part number is a-3109-016-a. the reference number shouldbe #380. we will issue a service bulletin. | ||
SONY |
KV1515
|
Tuner failure from static | Two units with complaint of tuner failure with static dis-charge to front controls. -hq comments: please try the solution outlined in s/b 200r especiallyaffixing copper tape to the control panel assembly. this grounded tapewill act as a collector of st | ||
SONY |
SLHF400
|
Fu-38 circuit board part number supplement 1 | P/n a-6717-395-b in supp #1 subs to a-6717-395-a which is thefu-38 board for the sl-hf600. the sl-hf600 has some additional partsmounted on it and one interconnecting wire that should connect to cn305on the tm-82 circuit board, but will not because of t | ||
SONY |
KV1882AEB
|
No video | The unit had no video. sound worked fine. we found theproblem to be caused by d393 going leaky. this was preventing sufficientbias on pin 18 of ic301. | ||
SONY |
CCDV8
|
No camera video | No video in camera mode. one pulse missing from ic707. | ||
SONY |
CCDV8AFU
|
Horizontal jitter during playback with vtr power on | Unit would shutdown in rec mode when cam power was on, and inrec or pb mode when vtr + cam power was on. with only vtr power on, play-back picture had horizontal jitter. |