Sony Repair Tips
Search: sony
Results: 20073
Results: 20073
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
XR740
|
Continuous auto reverse | Unit would auto reverse continuously. | ||
| SONY |
MDRA25
|
No part number for divergence cord | Mdr a25 is a repairable unit, however no part number fordivergence cord. -hq comments: the cord is part of the headband assembly. it comes asone piece. | ||
| SONY |
XR780
|
Part number missing | Protector (p/n 3-323-287-01) not called out on prints. also,many breaking. suggest fingers be made stronger. -hq comments: a service bulletin has just gone out regarding thisproblem. we will notify tokyo of breakage. | ||
| SONY |
CCDV8AFU
|
Distorted pb picture due to drum/capstan problem | This unit had a problem where the drum and capstan motorswould run uncontrollably for 4-5 sec then the unit would shut down andonly eject would work. i found q508 open. this caused ic501 to get veryhot only in play mode. | ||
| SONY |
KV1210U
|
Sub fbt | This sub fbt has instructions for installation but they are in japanese. i have a servicer that needs these instructions as soon as possible. -hq comments: we will publish service bulletin on this. | ||
| SONY |
XR75
|
Missing part numbers | Need part numbers for spacers where they are located in 7iin supplement #1. -hq comments: see supplement no. 1 published in march 1984, spacers areitems #347 and #348 p/n 3-592-651-00 and 3-592-652-00. | ||
| SONY |
XR780
|
Service manual errata | Service manual errata. s701, s702, s703 are incorrectlyidentified on page 41 of both manuals. s701 is tape direction switch.s702 is tape-in switch. s703 is tape-out switch. all are located on themd board. -hq comments: a service bulletin will be iss | ||
| SONY |
KV1365
|
Unit dead, replaced t503 and fuse | Unit dead, f602 was opened due to t503 being shorted. | ||
| SONY |
KV2601
|
No audio, replaced ic2001 | No sound. | ||
| SONY |
CFD5
|
Wrong part numbers | Wrong part and p/n missing. parts list reference 395 shouldbe 305. ref 395 p/n 7-627-556-38 butt 2.6 x 4 (s). -hq comments: a s/b will be issued. | ||
| SONY |
CFS400
|
Sound was distorted on playback due to slow speed | With old drive motor the speed was different when themachine was working on battery, and on ac (-5% on batt and -2% on ac).with the new drive motor the speed is the same but it is lower thanspecs (-45%) using a d pulley. -hq comments: please replace the | ||
| SONY |
KV1557R
|
Snowy picture | Snowy picture. | ||
| SONY |
PTB100
|
Part number for light bulb | Please inform of p/n for pattern box light bulb. -hq comments: p/n is j-602-049-03. this can be found in pattern box s/m (p/n *ptb-100). | ||
| SONY |
BMC660
|
Microphone cover p/n | There is no parts breakdown for the mike and to replace thecover only which snaps on, you have to replace the whole mike assembly.could you get us the part # for the mike -hq comments: the microphone hoods will be available shortly from kcp.the hoods ca | ||
| SONY |
BMC550
|
Microphone cover p/n | There is no parts breakdown for the mike and to replace thecover only which snaps on, you have to replace the whole mike assembly.could you get us the part number for the mike? -hq comments: the microphone hoods will be available shortly from kcp.the ho | ||
| SONY |
CCDV8AFU
|
Microphone cover p/n | There is no parts breakdown for the mike and to replace thecover only which snaps on, you have to replace the whole mike assembly.could you get us the part # for the mike -hq comments: the microphone hoods will be available shortly from kcp.the hoods ca | ||
| SONY |
CCDV8
|
Microphone cover p/n | There is no parts breakdown for the mike and to replace thecover only which snaps on, you have to replace the whole mike assembly.could you get us the part # for the mike -hq comments: the microphone hoods will be available shortly from kcp.the hoods ca | ||
| SONY |
STRYX50
|
Missing part number | Need p/n for fm front end assembly. -hq comments: part number for fe201 is a-4344-029a. | ||
| SONY |
XR780
|
Service manual errors in labelling of solenoids | S/m errors in labelling of solenoids. pm701 on pg 41 ofxr-740/747r/780/787r should be pm703 (direction change solenoid). thiswould agree with their schematics and mounting diagrams. pm901 on pg 34of xr-80 and pg 38 of xr-66 should be pm903 (direction) | ||
| SONY |
KX2501
|
Shutdown, replaced h out tr insulator | Set had intermittent shutdown with eventual burn out of hori-zontal output transistor. |