Search: sony
Results: 20100
Make Model Symptom Problem Solution By
SONY XE4
Dead. Chopper transistor s/c , check drys on 680Ω snubber cct
SONY XE4
Dead lop tr sc previously set shut down int. C513 2700pf in line osc cct
SONY XE4
Dead - line transistor short , fuse blown. Blows transistor instantly - loptx.
SONY XE4
Dead - fuse blown Mains sw internal arcing; q602 2sd1497 s/c; r622 & r623 680r o/c
SONY XE4
Dead - fuse blown C815 faulty tho check ok; q602 2sd1497 s/c; d605 & d614 rgp10g;
SONY XE4
Dead Dry joints on 2 large upright res in psu; 4a fuse o/c; 2sd1497 s/c - replaced with bu208a
SONY XE4
Colour - red shading around white verticals. R853 ( 1k ) o/c , d852 may check ok but be split.
SONY XE4
Blows chopper and or line transistors Replace d605 , 614 rgp15j and c513 2 , 700pf in line osc cct.resolder stand off resistors
SONY XE-3
Tuner drift aft 4 mins then chan search Switches s401-413 on front panel faulty
SONY XE3
Takes a long time to come on. Ra'a' (A.M.) A/S.
SONY XE3
Standby - stuck in standby. R632 ( 2.2m ) going high on panel a.
SONY XE3
No s/v , main supplies all coect Check 12v supply to tuner , follows complex path via r811 , d811 , connector d5 , and a12 pin 1 , q207
SONY XE3
Int startup. Rt01 (A.F.), Rt08 (D.M.), Rt09 (A.M)
SONY XE3
Flyback lines - picture shaded with no signal C801 leaky.
SONY XE3
Flyback - lines - intermittent. D304.
SONY XE3
Dead. Yasat 01 (Webs 1394S), Ra’a’ (A.M), Qa’ 02 (refute)
SONY XE3
Dead. R632 ( 2.2mr ) going high on panel a.
SONY XE3
Dead with no drive at pin 7 of the chopper control R632 ( 2.2m ) , which is connected to pin 4 of ic601 and is used for standby switching.
SONY XE3
Dead , ic oscillating ( may start if ic heated ) R 602 , 2.2m 1/2 w
SONY XE3
Blank screen sound ok Upc1377 line osc ic faulty