Sony Repair Tips
Search: sony
Results: 20072
Results: 20072
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
RX
|
Vertical line moving down screen. | C655 ( 220u f ) on psu. | ||
| SONY |
RX
|
Severe ew distortion & vertical overscan. | Sprinkle on l802. | ||
| SONY |
RX
|
Picture flickers a few mins after switch on. | Q656. | ||
| SONY |
RX
|
No remote or teletext. | C655 ( 220u f ) on psu. | ||
| SONY |
RX
|
No remote control operation. | C655 o/c. | ||
| SONY |
RX
|
No red. | Q703 s/c. | ||
| SONY |
RX
|
No raster-blank screen field collapse | Check d804 ( 1r2 ) | ||
| SONY |
RX
|
Int loss of picture on channel change. | Q710 , 11 or 12 ( lift d701 , 2 or 3 in turn to determine defective 1. | ||
| SONY |
RX
|
Frame collapse. | Ic 552 ( tda 3652 ) add mica washer behind ic & use silicone grease. | ||
| SONY |
RX
|
Field output ic replaced with version tda3654 | Change r518 from ( 1k5 ) to ( 6k8 ) on d board | ||
| SONY |
RX
|
Dead. | R651 ( 1.2r ) o/c & burning up change ic551. | ||
| SONY |
RX
|
Dark line 3" in from rhs of picture. | Check r825 , c802 , c804 , c803. | ||
| SONY |
RX
|
Blank raster. | Iskhakh 1 (Taddahdha) | ||
| SONY |
RM
|
No picture after 5 mins. | L810 o/c when warm. | ||
| SONY |
RE-1 KP41S3
|
Poor sound quality, hissing | Wrong standard is set (5.5mhz), enter tuning menu, enter each channel individually and select 'system change', change to pal i and press enter to store | ||
| SONY |
RE-1 KP41S3
|
Int no display, sound ok | No -12v supply on e board, ic905 12v regulator u/s (875992965) | ||
| SONY |
RE-1 KP41S3
|
Dead, set in trip mode due to no frame | Dj on r1507 on d board | ||
| SONY |
QE3
|
Int start up | C601 2µ2; r608 8m2; r609 2m2 | ||
| SONY |
QE3
|
Dead | Ic601 µ1394c; r632 2m2; q202 2sd788 | ||
| SONY |
QE1
|
Striations on lh side of pic | 2 x 33µ caps in psu ok but c804 on scan panel faulty |