Sony Repair Tips
Search: sony
Results: 20100
Results: 20100
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
RX
|
Blank raster. | Iskhakh 1 (Taddahdha) | ||
| SONY |
RM
|
No picture after 5 mins. | L810 o/c when warm. | ||
| SONY |
RE-1 KP41S3
|
Poor sound quality, hissing | Wrong standard is set (5.5mhz), enter tuning menu, enter each channel individually and select 'system change', change to pal i and press enter to store | ||
| SONY |
RE-1 KP41S3
|
Int no display, sound ok | No -12v supply on e board, ic905 12v regulator u/s (875992965) | ||
| SONY |
RE-1 KP41S3
|
Dead, set in trip mode due to no frame | Dj on r1507 on d board | ||
| SONY |
QE3
|
Int start up | C601 2µ2; r608 8m2; r609 2m2 | ||
| SONY |
QE3
|
Dead | Ic601 µ1394c; r632 2m2; q202 2sd788 | ||
| SONY |
QE1
|
Striations on lh side of pic | 2 x 33µ caps in psu ok but c804 on scan panel faulty | ||
| SONY |
QE1
|
No sound or vis - snowy screen- no front panel control except tv/av | Sw407 on front panel leaky tying up micro | ||
| SONY |
QE1
|
Burn up on crt panel | R756 & r758 47k 1/2w burnt; q753 j101q blown apart - used bc557b in lieu | ||
| SONY |
QE1
|
Bright raster & flyback lines. | R718 ( 330k ) gone high. | ||
| SONY |
PE3
|
6" wide bands across screen black grey white | Replace c655 ( 220uf ) 5v supply to micro | ||
| SONY |
PE-2
|
Int dead when on pic tears | Q001 bc237 | ||
| SONY |
PE-2
|
Frame foldover at top. | Check earth rail around line transistor. | ||
| SONY |
PE-2
|
Dead - burn up on psu. | Check for pin hole in mica insulating washer of chopper. | ||
| SONY |
PE
|
Blank raster. | Iskhakh 1 (Taddahdha) | ||
| SONY |
P2E
|
Off with squealing | Bu208a lop tr s/c | ||
| SONY |
LE1 KL37W2U
|
No text or menu, red led flashes 19 times | Ic1020 sda5273p-c134 part 875945222 (megatext) faulty | ||
| SONY |
KX20PSI
|
Int field roll with faulty col | Int switching to ntsc standard - cx7916 chip ic503 qaulty | ||
| SONY |
KVXF25M20
|
Lightening damaged | Smoothing cap c613 560uf, low v p/supply; d631 + d632 - s/c r602 4r7 o/c, c646 10uf 450v - popped, q605 2sk2845- leaky, d623 12v zener - leaky |