Toshiba Repair Tips
Search: toshiba
Results: 5591
Results: 5591
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| TOSHIBA |
C5SS 2857DB 2557DB
|
Pic shifted to rhs, horiz position adj not functioning | 9v regulator q430 not working due to faulty d430 zener mtzj5.1c (23316670) | ||
| TOSHIBA |
C5SS 2857DB 2557DB
|
No volume or channel on screen displays, other menu screens ok | Q501 ta1222an | ||
| TOSHIBA |
C5SS 2857DB 2557DB
|
Dead, no output from psu, fuse ok | D896 byd33j s/c | ||
| TOSHIBA |
C5SS 2857DB
|
Takes long to come on, slight line flicker when changing channels, otherwise blue screen | Replace 27mhz xtal on text pcb (23153472) | ||
| TOSHIBA |
C5SS 2857DB
|
No power, red led on green led flickering | Frame ic ta8427k, r327 (24339479), d302 byd33j | ||
| TOSHIBA |
C5SS 2857DB
|
Distorted sound from cold | Fit 0.1uf cap from base of mute transistor q612 to ground (tosh.technical) | ||
| TOSHIBA |
C5SS 2857DB
|
Bad striations on rhs of the screen | Ensure that line/frame leads are correctly installed in their cable tie clips after working on the set | ||
| TOSHIBA |
C5SS 2557DB
|
No sound from centre speakers | Q604 ta8211ah | ||
| TOSHIBA |
C5SS 2557DB
|
No line or frame sync, osd ok | Q501 tb1226n (b0385673) | ||
| TOSHIBA |
C5
|
Dead - strs6709 keeps going s/c pins 1, 2 & 3 | Also replace d809 mtzj5 - 6b if s/c | ||
| TOSHIBA |
C4E-R
|
Bands of patterning at top & bottom of screen at start up only | Line pulses being picked up by qd03 dpc amp- add 0.001µ cap across rd13 on print side | ||
| TOSHIBA |
C3SS
|
Off | Ic670 audio o/p chip s/c - set in overvolt condition | ||
| TOSHIBA |
C2D 3339DB
|
Tripping, red and green leds flashing at about 3hz | Q828 2sc2230ay leaky (can use 2sc2482 as replacement from onwa crt base) | ||
| TOSHIBA |
C2D 3339DB
|
Hiss/crackle from left speaker | Icg07 ta8776n | ||
| TOSHIBA |
C2D 3339DB
|
Big "bump" noise when switching to stby | Not faulty. switch off pro-logic before switching to stby (info from toshiba technical) | ||
| TOSHIBA |
C2D 2939DB
|
Stuck in stby | Zp82 2a o/c, ic501 ta8211ah s/c | ||
| TOSHIBA |
C2D 2939DB
|
No sound or pic (frame collapse) | No 12v from ic408 due to q546 2sc1815y s/c on av pcb | ||
| TOSHIBA |
C2D 2939DB
|
Int no pic or sound and goes to blue screen | Resolder q103 (if can) | ||
| TOSHIBA |
C2D 2939DB
|
Int loss of line or frame sync and goes to blue screen, corrupted or no teletext | Replace xtal zf01 27mhz (231253472) under screening can on text pcb | ||
| TOSHIBA |
C2D 2939DB
|
Faint blue screen, no remote or manual operation, no led | Sound ic670 ta8218ah (b0377305) s/c, zp81 5a (23144451) o/c |