Repair Tips

Search:
Results: 87727

Make	Model	Symptom	Problem
SONY	FD2A	Wrong p/n for l201	Wrong p/n in fd2a manual for l201. i believe it should be1-408-098-00 same as fd20. -hq comments: we will publish correction on this.
SONY	KV25VXR	No functions	No audio, tv or vcr.
SONY	SPP100	Base unit would not respond to handset	When handset was put in talk mode, talk led would not lightand base would not seize line. when base and handset were put in testmode, high speed id transmission from handset to base was ok. high speedid transmission from base to handset - handset did n
SONY	KV1944R	Slight loss of vertical sweep, replaced c523	Set displayed slight loss of vertical sweep and foldover atthe top. this capacitor checks good on checker but proved to bedefective.
SONY	SLHF900	Noise bars	Customer complained of noise bars at top and bottom of rasterin freeze frame mode. inspection revealed unit worked perfectly on itsown recording, but noise bars present when using alignment tape. viewingrf envelope displayed minor tape path problems ex
SONY	XR787R	No audio output	No output. q212 output high to all mute switches. ic201pin 17 was outputting high.
SONY	CCDV110	Bent pin on multiconnector	Bent pins.
SONY	CCDV1	No eject, door broken also	Poor solder connection cn304.
SONY	BMC220	Intermittent dew lite causing shut down	Replaced dew sensor + ic302. monitor p21 of ic301 alwaysstays (h) should indicate (l) if dew activated.
SONY	KPR36XBR	No audio, crackes on "e" board	No audio. e board cracked across corner of audio ckts.possible hidden damage from shipping.
SONY	CDP45	Mistracking	Skips intermittently usually about 2/3 of disc.
SONY	CDP55	Music skips	Music skips randomly.
SONY	SPKM8	Need part number for earphone plug	Need part number for part located above ref. #119 on page 18of s/m (earphone plug). -hq comments: the p/n is 2-115-887-01 and is available at kansas city.a s/b will be issued shortly.
SONY	WMDC2	Missing part number	On page 22, the fg coil, which is connected to ic601 pin 1,was not listed in the parts list.
SONY	CCDV110	No luminance	After warm up period lost luminance.
SONY	CCDV110	No camera power	Unit came in no camera power. found f901 blown dc-dcconverter (dr901) ok. found cn003 dr901 (should go to em-1 boardconnector 901) going to au-24 board cn403. both connectors are 2 pinred and gray wires and apparently were switched in manufacturing.
SONY	CDP25	Distorted audio	Distorted audio.
SONY	KV1975R	Int red picture, crt	The picture would turn light red and the brightness levelwould drop for about a minute. the tube would snap and the picture wouldreturn to normal.
SONY	KV2071R	Int red picture, crt	The picture on both of these units would turn light red and the brightness level would drop for about a minute. the tube would the narc and the picture would go back to normal.
SONY	KV2084R	Int red picture, crt	On both of these units the picture would intermittently turnlight red and the luminance level would drop. this would stay for abouta minute, and then the tube would snap, and the picture would return tonormal.