Repair Tips

Search:
Results: 87727

Make	Model	Symptom	Problem
SONY	XR44	Radio intermittently shuts off by itself	This unit was intermittently shutting off by itself in theradio function. the solder was not sticking to the diode lead. it wasas though the lead was not clean or had a cold solder connection. thelead would slip right through the solder connection. h
SONY	ESR10	Radio shuts off by itself	This diode has a cold solder connection or a dirty lead andthe solder will not stick to the lead.
SONY	D7S	Unit will not play	No focus search. this problem may have been caused byservicer after he replaced fop. l504 was open and there was a soldershort under it which was causing pins 18 and 20 of ic502 to be shortedtogether.
SONY	RME100V	Use of editor with jvc hr-7650u vhs vcr	Vcr has 10 pin camera jack. do we make an adapter to inter-face with rme-100v? -hq comments: we currently have no adaptors available for vhs vcryou may however suggest to the customer to contact a video supply outletwhich carries adaptors. the adaptor
SONY	SLHF1000	Tearing at top and bottom of pix in bi slow and still	Tearing at top and bottom of pix in beta i, slow and stillmode. all other speeds look ok. tape path also checked good. ialso seen sl-hf750 -hq comments: we have evaluated this unit. a combination of tape path,bi rf switching adj., and slow tracking
SONY	KV2780R	High pitched squeal (audible) all the time, replace yoke	Audible high-pitched squeal from inside tv cabinet all thetime. we are beginning to see numerous complaints of high-pitchedsqueal from 27 tv receivers.
SONY	KV2093R	Picture bounce, replace if block	After about 15 min. picture would bounce and with the audioreceiving both sap and main there was a pop in the right channel. videoin was good. found this to be heat related as cooling if block unit wouldgo back to normal.
SONY	KV25XBR	Vertical jitter on pay-per-view channel	Customer in chicago subscribing to group w cable set experi-ences vertical jitter and roll on pay-per-view channel only. all otherbroadcast and pay channels ok. -hq comments: pls compare composite video waveform at pin 22/ic1501 forok channels and the
SONY	CDP620ES	Will not read toc - noisy focus search	Unit seemed to have a focus servo or search problem. withscope on fo test point, focus search going up was ok but in focus searchgoing down there seemed to be an open servo loop.
SONY	CCDM8U	Need part number for chassis on page 126	Need part number for chassis on page 126. -hq comments: the part number is a-7010-080-a. a s/b will be issued.
SONY	TCFX510R	Incorrect description in s/m	Correct p/n for case, silver should be 3-307-532-31 and forblack one should be 3-307-532-11. -hq comments: we will issue a service bulletin.
SONY	SDP505ES	Wrong part number	Ic702 (cxp5016h-118s p/n 8-759-800-54) was ordered from kcp.received p/n 8-759-800-54 (an la3365 ic). la3365 is correct. micro-processor has incorrect part number.
SONY	FD3A	Dial pointer, x-3332-204-1	Pointer missing from unit. pointer is not declared onexploded views in fd-3a or fd-2a manuals.
SONY	KV2080R	Pop in sound, value changes	With external amplifier/speaker pop in sound when changingchannels. -hq comments: to fix the problem make the following component changes:c1461, c1462 from 1u/50v to 4.7u/50v (p/n 1-124-192-00)r1461, r1464 from 22kΩ to 1kΩ/1/6w (p/n 1-247-831-00).
SONY	CDXR7	Pll free run frequency adjustment	To adjust pll free run - l501.
SONY	STRAV580	No memory	No memory of stations.
SONY	EVS700U	Intermittent noise during pcm playback (tracks 4, 5, 6)	1) pcm playback of tracks 4, 5, 6 has dropout during audioplayback. 2) stereo indicator light flashes. 3) video playback has noiseat bottom of screen.
SONY	STRVX350	No audio output	The speaker relay would not engage although the audio outputsand sensing circuits were ok.
SONY	CCDM8U	Drum rotation is erratic and unit shuts down	Drum is erratic and unit shuts down. -hq comments: check c246, md-10 board. we have reports on this capbeing leaky. please inform results.
SONY	CCDV3	No eject	No eject. unit had been dropped and case was damaged.