Cce Repair Tips

Search: cce
Results: 4816

Make	Model	Symptom	Problem	Solution	By
CCE	HPS1404	Tv cce hps 1404 does not oscillate	It was a broken line from jd 12 to hb20		ELETROCLAUDIO AGUAS BELAS
CCE	HPS2185FS	Dark screen with a green light, you can only see better in the dark LED won't stop flashing	Profit		ELETROCLAUDIO AGUAS BELAS
CCE	TV29USP	Closes image in the corners and distorts	R850 open polarizes q407 base		BRUSKE
TV CCE	HPS 2198U	Screen reduced on the sides with weak images	C 825 47ufx160vcc	Replace	toninho da eletronica
CCE	TV29USP	Black horizontal band on the left side with folding of the image	R401 18k open	If this component is not present, analyze the line of this component and you will inevitably find the defect	JOSÉ GUSMÃO
CCE	HPS2991FS	On and off does not fluctuate	Leaky d403 diode		camurci
CCE	HPS2097	Dark line on the right side, depending on the image background, 102v power supply with +- 95v	Change the 1r resistor r813		Domingos da Eletronica
CCE	2991	Dark screen with 3 dots at the top of the screen	C395nf 250v		This email address is being protected from spambots. You need JavaScript enabled to view it.
CCE	HPS2981	Escapes tune	Change t101 and t102 and touch up their cores	Replace t101 and t102 and touch up their cores	robert
CCE	HPS 2971C	Without sound, with permanent audio	C 661 broken		carlinhos100
CCE	HPS2004 0000	+b 125 c/ 110 vts	C 825 47uf 160vts	Replace without testing	Jhone Eletronica socb sp
CCE	HPS2991	Saturated image	R434 10k	Replace r434 10k	johnny busnadiego
CCE	HPS2091	Power supply output voltage all at 0 volts.	C 809 pin loose (220mf/25) at the power supply.		Ademir tc
CCE	TV-29USP	Power led oscillating does not work	Capacitor eletrolitico 100x160v c-825	Replace and charge	arasonic
CCE	HPS2981	Does not turn on, burns r410 of 0.47	I replaced it with one of the same 2 watt value, it heats up but doesn't burn. the flyback heats up	Replace flyback tat2901a	Diego Uczak
CCE	TV - 2918USP/AV	Works but with a dark bar running vertically on the left side	This TV is working, but with a dark bar running vertically on the left side, your problem was solved by changing the capacitor c 402 (331 / 2kv) which had low capacitance when replacing it with a good one the TV started working normally again . I hope it helps some colleagues. thank you and good luck.		This email address is being protected from spambots. You need JavaScript enabled to view it.
TV CCE	2118 USP 21"SL FBT STD	Horizontal symmetry with a waist on the canvas and facing with a horizontal black stripe	With the change of cap 417 the black band rezovildo leaving the change of diode 409 with leakage and the horizontal symmetry resolved		WISLEN
CCE	HPS1403	Not secure regulation in service mode	Voltage on pins 36 and 37 on the micro	Check, r729, r728 (100r) , dz705, 704 (4.7).	joaomvjr
CCE	HPS2128 2128	It doesn't turn on, it stays on standby with a noise ticking ticking softly when I press power, the LED turns off but continues ticking ticking switching c825	C825 =100uf 160v	Replace c825	BOBY
CCE	HPS2971	Phase	R.401.18k		jps eletr.c.grande