Cce Repair Tips
Search: cce
Results: 4816
Results: 4816
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| CCE |
2070
|
The TV turns on and the channel number appears on the screen and does not perform any function or turns off. | Open resistor r 305, I changed it and solved the problem | eletronprezar | |
| CCE |
HPS 2171-FS
|
Power supply ñ gun looks like horizontal output shorted | Capacitor c825 ok . | Jair felix cap.poço PA | |
| CCE |
HPS 1402
|
Vertical closed | Resistor r306 1.5 homs also change r 308 and 309 both 2homs | And just replace and run for a hug | fernando timbauba PE |
| CCE |
HPS-1497
|
No audio | Check smd c601 ceramic capacitor, in my case it was broken when removed | After the replace, the audio started working again. | SOUZA |
| CCE |
HPS1473
|
TV has a banner on the left side | 18k resistor open near the horizontal drive | Just replace it and that's it | plramos |
| CCE |
HPS-1497
|
When turning on the TV, it does not generate high voltage, giving the impression of being the flayback, a normal power supply. | Vertical output in short.la7804. | JAILSON | |
| CCE |
HPS-1497
|
Giving 200v at +b of the secondary where the normal is 103v | Changed 150k resistor r806. | Replace it and good luck!!!!!! | JOANILDO |
| CCE |
HPS-2185FS
|
TV won't turn on LED blinks 11 times for a little bit blinks another 9 times for a little bit comes on and stops blinking. total 21 blinks | Vertical without 12 volts | Open 1r resistor fr402 or the line of the same match | eletroclaudio aguas belas pe |
| CCE |
DVD757X
|
No sound may also be failing or cracking. | Capacitor ec24 -220uf/16v do circuito de mute. | ||
| CCE |
HPS 2908
|
Image shrunken horizontally, dark, out of frequency, beeping but with sound | Oscillator driver trafo | Master - Porto Alegre | |
| CCE |
HPS2185FS
|
When you plug it into the socket, the green LED turns on and off when the relay is turned on. | R 822 of 6.8Ω changed and c 834 with leak | Replace with another | EVALDO GOMES ELETRÔNICA GOMES URUÇUI-PI |
| CCE |
HPS2971
|
No image and no sound and the 51v of the vertical is missing, having only 18v | 564pf capacitor 409 exhausted | klein | |
| CCE |
HPS 1497
|
Doesn't work | Zener diode 3v3 position d808 | Domingos da Eletronica | |
| CCE |
HPS-2991 FSC
|
When pressing the power button, the LED TV turns off, activates high voltage, the filament lights up, but the screen remains off as if it had not been turned on | A small leak in the scream capacitor c901 which is on the tube's PCI | If we touch the pins of any RGB IC the screen lights up | gilsce |
| CCE (BUCHA) |
HPS 2073
|
LED oscillating, does not start and does not give any signal at 110v | C 805 (150y/400v) aberto | Adrian Chapadão | |
| CCE |
HPS2171FS
|
Didn't care | Cold solder and mat cable with hole | Resolder the main components of the power supply and apply high-fusion tape to the mat wire | Félix |
| CCE |
HPS144
|
TV tried to work but it didn't turn on, it lit the filament three times and turned off | Change transistor 804 open emitter | multsom | |
| CCE |
HPS-3301
|
Burning the horizontal outlet | Cold solder on the horizontal driver, also check the capacitors and solder in the horizontal sector | eletroclaudio aguas belas pe | |
| CCE (BUCHA) |
TVS 2910FSD
|
Turns on and then turns off | Exchange q802 and q805 without testing bc337-25 | Adrian Chapadão | |
| CCE |
HPS1405
|
Inoperative LED lights up when turned on the LED turns off but does not oscillate | Changed 100pf capacitor c410 | MACCELETRONICA |