Cce Repair Tips
Search: cce
Results: 4816
Results: 4816
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
CCE |
HPS 2007
|
Dark bands on the left of the screen | Capacitor c 423 (4.7 u f x 160 v) with loss of capacitance or high esr | ||
CCE |
HPS 2006
|
Inoperative, buzzing when plugged in | Transistor q 801 (2sk 2545) leaking or shorted | ||
CCE |
HPS 2004
|
Burning the cl tda 6107 | Resistor r 207 (470r) open | ||
CCE |
HPS 2004
|
Does not obey the on and off functions via the remote or the panel, just by removing the socket | Transistor q 401 (horizontal exciter) broken | ||
CCE |
HPS 2004
|
Lack of vertical scanning | Capacitor c 405 (2 nf x 50 v smd) 1 with leak or short | ||
CCE |
HPS 2003
|
Normal operation for some time. screen gradually darkens | Poor contact on trc socket pins - replace socket | ||
CCE |
HPS 2002
|
Inoperative, stand-by LED off | Integrated circuit ic 801 (uc 3842) faulty | ||
CCE |
HPS 1495B
|
Visible retrace lines | Capacitor c 302 (47 uf x 50v) with loss of capacitance or high esr | ||
CCE |
HPS 1495B
|
Reduced vertical sweep, approximately 2 cm at the top and bottom | Capacitor c 306 (2.2 eu x 50v) with loss of capacitance or high esr | ||
CCE |
HPS 1492
|
Does not arm the power supply. cricket-like noise | Capacitor c 411 (330 pf x 2 kv) shorted or leaking | ||
CCE |
HPS 1491
|
Inoperative, fuse open | Faulty ptc, no resistance variation depending on temperature | ||
CCE |
HPS 1481
|
Vertical scan with reduced height | Resistor r 315 ( 1,8 m ) com | ||
CCE |
HPS 1450R
|
Fly-back "sizzling, with lines of interference on the screen | Reverse the terminals of the wire wound around the fly-back ferrite | ||
CCE |
HPS 1481
|
Does not obey the functions of the panel or remote control | Transistor q 801 with open junctions | ||
CCE |
HPS 1481
|
Inoperative, ic 501 no excitation signal | Diode d 705 (1n 4148) as leakage | ||
CCE |
HPS 1480 D
|
Dead | Resistor r 305 (390) open | ||
CCE |
HPS 1480C
|
Dead | Resistor r 804 (1 k ) com | ||
CCE |
HPS 1480
|
Poor tuning on channels 2 and 4 | Diode d 703 (1n4148) with poor internal contact (may be open) | ||
CCE |
HPS 1480
|
Excessive brightness, screen control does not work | Inductor l 502 (180 uh) open | ||
CCE |
HPS 1480
|
High mat fountain, "splashing" "mat | Capacitor c 415 (6 n 8 x 1600 v) open, loose or cold soldered |