Cce Repair Tips
Search: cce
Results: 4824
Results: 4824
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| CCE |
HPS 1450 RS
|
Dead, no plot, no audio | Capacitor c 440 ( 10 u f x 160v) em curto | ||
| CCE |
HPS 1430R
|
Poor vertical sweep, excessive heating of the vertical sweep cl | Capacitor c 357 (100 u f x 35 v) with loss of capacitance or high esr | ||
| CCE |
HPS 1430R
|
Osd shifted to the left. channel indications do not appear | Trimpot rv 5505 (4.7 k) with residual resistance > 1k. readjust after exchange. | ||
| CCE |
HPS 1430R
|
Image with drizzle on all channels | Cag vr 151 adjustment trimpot | ||
| CCE |
HPS 1430
|
Poor vertical sweep, bands at top and bottom of trc | Capacitor c 356 (1000 u f x 16 v) with loss of capacitance or high esr | ||
| CCE |
HPS 1425
|
Does not tune in to any of the channels | Resistor r 757 (18 k q ) aberta | ||
| CCE |
HPS 1415
|
Normal plot, no audio, no image | Capacitor c 101 (1 k pf- disk) shorted | ||
| CCE |
HPS 1407
|
Clear screen, with retrace lines | Resistor r 901 (22 q) open | ||
| CCE |
HPS 1407
|
Insufficient width | Capacitor c 415 (4.7 uf x 160 v) with loss of capacitance or high esr | ||
| CCE |
HPS 1407
|
Dead | Horizontal exciter transformer | ||
| CCE |
HPS 1407
|
Dark band at the top of the trc screen | Capacitor c 302 (100 u f x 35v) with loss of capacitance or high esr | ||
| CCE |
HPS 1407
|
Turns off after some time of operation | Transistor q 404 (mps at 42) with leakage | ||
| CCE |
HPS 1404
|
Retrace lines at the top of the trc | Fr 901 fusistor open, due to ic 901 (tda6107q) being shorted | ||
| CCE |
HPS 1404
|
Inoperative, horizontal output transistor (bu2506dx) shorted | Grampo do "fly - back "t 402 ( tat 1409b ) partido | ||
| CCE |
HPS 1403
|
Turns off after a few minutes on | Capacitor c 825 and c829, see c 812 with loss of capacitance or high esr | ||
| CCE |
HPS 1403
|
Turns on normally, but then turns off when it's bright (video) | See tu 101 varicap, memory and ic 901 | ||
| CCE |
HPS 1403
|
Power supply does not break | Capacitor c 806 and c807 with loss of capacitance or high esr | ||
| CCE |
HPS 1403
|
Three lines ( b , r , g ) in the center of the screen | Capacitor c 301 with loss of capacitance or high esr | ||
| CCE |
HPS 1403
|
Stand-by LED blinking | Capacitor c826 with leakage or loss of capacitance | ||
| CCE |
HPS 1402
|
Transistor q 402 (horizontal output) burning without apparent cause | Replace the 2k2 3w resistor r 411 with 4k7 3w |