Cce Repair Tips

Search: cce
Results: 4824

Make	Model	Symptom	Problem	Solution
CCE	HPS-1495B	Normal sound, vertical with a 2cm deficiency, at the top and bottom of the screen. excess brightness and lines of retraces, across the entire screen.	C306 2.2nf/50v - causes height deficiency, flyback causes the remaining
CCE	HPS-2092 B	Normal sound, tv doesn't open vertically, with just one horizontal line	Change ci ic301 - tda8356, the fr403 fusistor - 0.5w 1r 5% and r308 - 100Ω
CCE	HPS-2780	Dead	R-410
CCE	HPS 14R	Strip with excessive brightness in the vertical direction	D411 e c410
CCE	HPS 1404	Turns off after running for a few hours.	Transistor driver h q401 mpsa42a
CCE	HPS 2006	Dead	Q801, fet 2sk2545
CCE	HPS 1402 à 2004	The horizontal output transistor burns out for no apparent reason.		Substituir o resistor r411 de 2k2/3w p/ 4k7/3w
CCE	HPS 2990	Flashing the image	Power supply transistor, 2sc4430
CCE	HPS 2181	Doesn't start	Zener (upc574)
CCE	HPS 14	Burns horizontal output	C 440 (10x160) sold out.
CCE	HPS 2990	Unstable brightness, frame reducing	22uf/50v near IC sink
CCE	HPS14	Inoperative - power supply activates the relay but does not oscillate.	R803 (150k)
CCE	CS555	Dead cd	Q 508
CCE	HPS 2081C	When it turns on it takes a while to give color.	5v zener diode (d813)
CCE	HPS 2070S	Left side lane	R 427 open.
CCE	HPS 1402	Burning horizontal outlet		If the horizontal output transistor is burning without apparent cause, replace the value of r411 from 2k2 to 4k7/3w
CCE	HPS 2080	103v supply becomes low when turned on and returns to normal.	Check r 805
CCE	HPS 1481	Height adjustment does not open the entire image, causing darkness at the top.	Check r-315 and r-312
CCE	HPS 2050	Doesn't work	D805
CCE	2080 B	Inoperative or intermittent	1n4002 which is printed on the board in place of r417 which goes to the cathode of the zener d403