Philco Repair Tips
Search: philco
Results: 4811
Results: 4811
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
PHILCO |
TP2052N
|
Flickering image with vertical/closed bottom | Electrolytic cap of 470/16 - c716 | Replace the same for another 470/25 | eletronicaapolo |
PHILCO |
PCM2044
|
Misty image. | Check the entire contrast line. To speed things up, momentarily circuit pins 25 6 26 of the tda8361 and check if contrast returns, if it does, check the contrast line between processor and ci tda 8361 and you will certainly find the damaged component. | Head. c116 47 pf c/ leak e d 301 | ELETRÔNICA ESTUDIER - OLIBIO |
PHILCO |
TF2953
|
Intermittent on and off | Micro power switch with leakage | Sw7 replacement | valcir narciso |
PHILCO |
PCS 2956
|
Very low sound in rf, normal av | Ic tda8843 com problema | Simple | PAIAL.ELETROS |
PHILCO |
PCS 2956
|
No sound, both rf and av, very low voltage on ic450 | Ic450 short | Replace tda9855 | PAIAL.ELETROS |
PHILCO |
PCS 2956
|
Doesn't start | Q706 | Replace with bc337, observe pinout | PAIAL.ELETROS |
PHILCO |
TP2920
29 |
TV turns on and off when it is closed on the side with a finger | C1701, e c1703 | negodrama | |
PHILCO |
PSC 2952
|
Burning r 715 from 200v power supply | C 806 on the kinescope plate | ||
PHILCO |
TPF2121
|
When turned on, it goes out of stand by and the LED starts flashing | Fly-back | Claudio - Paulista - Pe | |
PHILCO |
PCS2950
|
Characters don't work | Coil l1103 near the computer (open this coil and break the 02 internal capacitors and place 02 external capacitors of 25pf each) | simas433 | |
PHILCO |
2140
|
Cloth magtetizada | Saida is vertical | Defective vertical outlet | Roberto Consertos |
GRADIENTE OU PHILCO |
TPF 2130
|
Turns on and off as soon as the signal and video appears note: blurred as if it were a defective socket | Smd capacitor shorted vertically | Replace c 601 (smd) short and r708 open | George Pontes |
PHILCO |
PCM1446
|
TV doesn't turn on. | Defective power supply, zd904=30v zener with leak and r923=1r open. | I replaced the zener and the resistor and jewel. | Amando Olímpia. |
PHILCO |
PCM2044
|
No characters | R612 de10k | asbrito | |
PHILCO |
PCS2952
|
Flashing oled power without parazr | Power supply c 911 | luiz de sao | |
PHILCO |
TPF29S4F
|
Cushion effect image | R1701 aberto 10r2w | GILSOM | |
PHILCO |
PCM 1444
|
Running away from color and shaking as if it were out of horizontal frequency | C205 2.2mf put new, close to the micro | ||
PHILCO |
PHT550
|
Does not read CD/DVD | Disc motor does not rotate (despite the voltage it did not work) | Changing the motor and 1r smd resistor on pin 12 of the c.i. motor drive. u4 (a5888s) | |
PHILCO |
TP2053
|
Didn't care | When connecting the TV to the socket, the LED turned on and the power supply in standby went to 15 volts. When activating the power power supply it rose to 115v and then dropped to 15v. I removed the solder from the +b of the fly and activated it and the 115 stabilized. I removed it the fly and put a test one and the TV started working again | Replace fly back | José Gusmão |
PHILCO |
PCM-1451/2051
|
Out of phase or shadow in the image and horizontally displaced | R710 changed zd702 8v2 with leak. | Replacement | alex/feteer |