Philco Repair Tips
Search: philco
Results: 4811
Results: 4811
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILCO |
TP-2052N
|
Oxilates and stops | Replace fly back (ov-2094/d1) | Ademar / Videira sc | |
| PHILCO |
PSC-2976S
|
Image is waving on the sides | Change c-933 c-944 c-934 to see if the latter is not missing | Ademar / Videira sc | |
| PHILCO |
PSC
|
Image is waving on the sides | Change c-933 c-944 c-934 to see if the latter is not missing | Ademar / Videira sc | |
| PHILCO |
2956N
|
Volume increases in 3 stages | Turn off the TV, then press the channel + and - keys on the TV and turn on the TV using the remote control | Ademar / Videira sc | |
| PHILCO |
TP-2052N
|
LED flashing and the +b on the secondary varies | Replace o ic-901 (tda-4605-03) c-911 c-913 | Ademar / Videira sc | |
| PHILCO |
PCS-2952
|
Vertical thick stripes | Replace 270r resistor connected in parallel with the deflector (r-610) | Ademar / Videira sc | |
| PHILCO |
PSC-2952
|
Does not oxidize, the LED keeps flashing | Saida replace vertical replace (la-7833) d-703 e r-720 | Ademar / Videira sc | |
| PHILCO |
PCM-2046
|
Disarming | Change c-716 r-706 d-706 from the abl line | Ademar / Videira sc | |
| PHILCO |
TPF-2130
|
Vertical closed | Resolder d-702 the same with cold solder | Ademar / Videira sc | |
| PHILCO |
PH-21
|
With sound, without image and blurred tube with various colors | Change vertical output | Ademar / Videira sc | |
| PHILCO |
PCM-2046
|
Image blinking or flickering | Replace diodes d-301 and d-302 | Ademar / Videira sc | |
| PHILCO |
PH14/21/29
|
Does not turn on or turns on and off | Replace o transistor v502 (2sc2383) | Ademar / Videira sc | |
| PHILCO |
TPF 2130
**** |
Rainbow turns on and then turns off. | Ci vertical stv 9302 r708 1r open d702 shorted and c601 100.50 smd shorted | Replace the components and everything is ok. | ELETRÔNICA IDEAL |
| PHILCO |
PCR-1447
|
Turning off after some time | Capacitor c708 de 471 2kv | Replace without measuring | eletrônica reis |
| PHILCO |
PH29C
|
Does not turn on, stand-by off, +b = 0 volts, normal primary 215v on the filter. | Switching diode d808 (ru3c) shorted. replace it with equal or equivalent rgp15m-j, by299, by438, byw96e. | TECNOGUEDES | |
| PHILCO |
TP29C21
|
TV turns on, after turning it on for a few seconds the screen showed a picture without drizzle | Vertical exit defect | Replaces the vertical output ci | dinei 1965 |
| PHILCO |
PH29USP A2
|
Only opens the top half of the screen, without image and with retraces | Diode vd564 (-15) | reinaldo almeida | |
| PHILCO |
PH29
|
Dead (ray) | Strw6556 open and photo shorted at output. | Note: fuse ok | Ádrian Chapadão do Céu-Go |
| PHILCO |
PCS 2950
|
Triggers protection before the image appears. | C-731 = 1uf x 160v. | FERNANDO S | |
| PHILCO |
TV PH 29 US A2
|
Vertica only opens from the middle down and with a shutter effect change the q 602 c 2383 and run to the hug | Change q802; transistor c2383 in this one I found but I decided, that's a very good tip | DAVI DE PEIXE -BOI PARA UM DICA PRA VÇS |