Sony Repair Tips
Search: sony
Results: 20089
Results: 20089
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
SONY |
WMFX433
|
No fm reception | No reception in fm, unit only produces static. commonproblem, seen in three units in a row. | ||
SONY |
WMFS495
|
"e" flashes on display | E flashes on display. | ||
SONY |
WMFS495
|
Intermittent take up | Pin that pushes p. roller assy to left or right forautoreverse jumps under slider causing pendulum not to engage take up.pin and slider were slightly bent. -hq comments: throughout our reliability tracking of this model, tokyohas been advised to improve | ||
SONY |
MZ2P
|
Gears strip | Worm wheel stripped 2 months after it was replaced. this gear is meshed with a brass worm gear is this a potential problem? | ||
SONY |
SLVR5UC
|
E-e pix looks like bad horiz sync-replc shorted q673/lr10 bd | E-e pix bad, playback ok. found q673 on lr10 board shorted. | ||
SONY |
SLV940HF
|
Intermittent operation - replaced x201 on ma-214 board | Int. won't work properly. | ||
SONY |
SLV780HF
|
Intermittent operation - replaced x201 on ma-214 board | Int. won't work properly. | ||
SONY |
SLV780HF
|
Lines in pix - tape path alignment | Lines in pix. | ||
SONY |
SLV780HF
|
No tracking | Tracking doesn't work. | ||
SONY |
SLV780HF
|
No power - replaced cp123 | No power. | ||
SONY |
SLV740HF
|
Intermittent operation - replaced x201 on ma-214 board | Int. won't work properly. | ||
SONY |
SLV720HF
|
Mech jam | Jam. | ||
SONY |
SLV640HF
|
Intermittent operation - replaced x201 on ma-214 board | Int. won't work properly. | ||
SONY |
SLV440
|
Won't accept tape | Won't accept tape. | ||
SONY |
SLV440
|
Shuts down when inserting a tape- replaced fl gear # 202 | When inserting tape unit goes to shut down. | ||
SONY |
SLV440
|
Makes noise when tape is in unit - repaired & realigned mech | Makes noise when tape is in unit. | ||
SONY |
SLV340
|
No playback video - replaced ic101 | No playback video blue screen. audio ok. | ||
SONY |
SLV340
|
All segments on display light upon plugging in - replc ic501 | All segments of display light, no functions. | ||
SONY |
EVS5000
|
Clock runs fast (2 sec per day) - adjust timer clock | Clock runs fast about 2 sec per day. found timer clock adjustment. clock was running at 4096.11 hz spec calls for 4096-04 .01. | ||
SONY |
EVS5000
|
Lp playback & record problems | 3 units same customer 2 evs5000, 1 evs7000. evs7000 recording has bad p/b. on both evs5000 separate recording & p/b of each maching is fine. checked all three 2/ tracking tape and all were ok. |