Sony Repair Tips
Search: sony
Results: 20073
Results: 20073
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
CDX51
|
Eject button seperated from escutcheon, can't eject magazine | Escutcheon wears out around the 2 prongs that hold the ejectbutton. this allows the button to become seperated from the escutcheon.this causes the magazine to jam inside the unit because the eject buttondoes not make contact with the eject switch sw951. | ||
| SONY |
CDX51
|
Skips (replaced optical pickup) | Skips. | ||
| SONY |
CDX5090
|
Unexplained error code in test mode: "e-a0" | An unexplained error code appeared on the display while in thetest mode. the code is e-a0. -hq comments: tokyo told us that program bugs may account forunexplained error codes. in this particular case, the e-a0 appears whenthe unit tried to eject the | ||
| SONY |
CDX5090
|
Error code e44 | Servicer has unit that customer complained it dropped out oncein awhile. servicer has not been able to duplice problem. put unit intest mode. after 6 hours of playing e44 came up on display but unit kepton playing. noted fpr 03252. here's another er | ||
| SONY |
CDX5090
|
Discs would load but not play (removed foreign material) | The discs would load but would not play. | ||
| SONY |
CDX5090
|
Faceplate will not stay on (lever on lock assy was broken) | The faceplate would not stay secured to the main unit. | ||
| SONY |
CDX5090
|
No display illumination (replaced lamps pl801 and pl802) | There was no illumination for the display. | ||
| SONY |
CDX5090
|
Amp remote line does not activate (reslodered cnp501 pin 3) | The unit would not output any voltage on the amp remote leadwhen the unit was operating. | ||
| SONY |
CDX5090
|
Display failures (missing segments, cracked lcd, etc.) | Various display failures have been noted, such as missingsegments, cracked lcd, segments always illuminated, etc. | ||
| SONY |
CDX5090
|
Skips (found optics bad; rf level less than .9v p-p) | Unit skips. | ||
| SONY |
CDX5090
|
Broken buttons/keyswitches | - button stuck down, + button broken. | ||
| SONY |
CDX5090
|
Suts off when in cd modes (found optic bad) | Shuts off when in cd mode. at times, unit skips sittingstill. | ||
| SONY |
CDX5090
|
Skips, even when vehicle is stationary (found optic bad) | Skips, even when the vhicle is not moving. | ||
| SONY |
CDX5090
|
Kss313a optics in place of kss410a | Some cdx5090's have kss313a optical in them, even though themanual indicates kss410a optical. | ||
| SONY |
CDX5070
|
Unexplained error code in test mode: "e-a0" | An unexplained error code appeared on the display while in thetest mode. the code is e-a0. -hq comments: tokyo told us that program bugs may account forunexplained error codes. in this particular case, the e-a0 appears whenthe unit tried to eject the | ||
| SONY |
CDX5070
|
Error code e44 | Servicer has unit that customer complained it dropped out oncein awhile. servicer has not been able to duplice problem. put unit intest mode. after 6 hours of playing e44 came up on display but unit kepton playing. noted fpr 03252. here's another er | ||
| SONY |
CDX5060
|
Unexplained error code in test mode: "e-a0" | An unexplained error code appeared on the display while in thetest mode. the code is e-a0. -hq comments: tokyo told us that program bugs may account forunexplained error codes. in this particular case, the e-a0 appears whenthe unit tried to eject the | ||
| SONY |
CDX5060
|
Error code e44 | Servicer has unit that customer complained it dropped out oncein awhile. servicer has not been able to duplice problem. put unit intest mode. after 6 hours of playing e44 came up on display but unit kepton playing. noted fpr 03252. here's another er | ||
| SONY |
CDX45RF
|
Skips when playing outer tracks (see bulletin 358r2 for fix) | The unit skips when playing the outer (higher number) trackson the disc. | ||
| SONY |
CDX45RF
|
Skips (cleaned excess grease frok mechanism) | Skips on outer tracks of disc. |