Sony Repair Tips
Search: sony
Results: 20073
Results: 20073
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
MZR2
|
Distorted line input | Record input distorted in left channel, line in only. foundsignal looked ok at both input to ic303 but dc level at pin 3 too low, .6vshould be 2.2v. | ||
| SONY |
MZR2
|
Line out, audio | Unit had no line out. -solution :lf304 filter open, replaced. | ||
| SONY |
CFS1035
|
No audio in tape mode (radio o.k.) | In tape mode: either no output or output on only one channel. | ||
| SONY |
SLVR5UC
|
No tuner video, no pb color - replace ic653 | No tuner video, audio ok. no color on pb. video signal onpin 2 ic653 ok. no output on pin 4. | ||
| SONY |
SLVR1000
|
How do we adjust clock? board available at tech dept (khaled | The service manual shows an ic used to adjust clock. on other units (slvr5) this was available as a pc board. the ckt is slightly different for the slvr1000 and will there be a board made available for this model? with | ||
| SONY |
SLV940HF
|
Damaged loading assembly - replace fl assy | Wouldn't accept tapes loading assy was bent. | ||
| SONY |
SLV940HF
|
Noisy unit - replace gnd shaft assy with new improved | Noise in play and record. noise caused by drum assy. unit returned by customer to good guys. | ||
| SONY |
SLV780HF
|
Distorted pix - resolder pin 1 of ic201 (sys con) | Distorted pix on pre-recorded tapes and tapes recorded in unit. found heads not switching. no rf sweep. found ic201 pin 1 not soldered. | ||
| SONY |
SLV780HF
|
Won't eject tape - realign main brake assy (s) #210, 211 | Won't eject tape. | ||
| SONY |
SLV780HF
|
Won't accept tape - realign fl block assy pins on left side | Won't accept tape. | ||
| SONY |
SLV780HF
|
Pix shakes on pb - align tape path | Pix shakes on playback | ||
| SONY |
SLV780HF
|
Dead - replace cp101 power block | Dead. | ||
| SONY |
SLV780HF
|
Won't accept tape -replac ic071(ma214 brd)-cam/load mot driv | Won't accept tape | ||
| SONY |
SLV740HF
|
No eject - cass door lever misaligned | Tape will not eject. found cassette door lever is misaligned. door lever is located on left side of fl block assy. | ||
| SONY |
SLV720HF
|
Intermittent color recording - cold solder on x101(vi127 bd) | Intermittent black and white recording (no color) | ||
| SONY |
SLV720HF
|
Won't load - replace ps450(semiconductor fuse on fv line) | Unit not loading the tape. found no 5v at the leading loading terminal | ||
| SONY |
SLV640HF
|
No display all other functions operate - replace cp102 conv | No display. power led lights and all other functions work. | ||
| SONY |
SLV640HF
|
Need extension cables to work on hi-5 display pcb | When you have a display problem, you cannot easily get to the back side of this pcb to measure around ic302. could we get extensions for cn904 and 905. if not, this is how we worked on unit: disconnected two cab | ||
| SONY |
SLV575UC
|
Sound worbled,auto trackin blinks - replace tension brake | Auto tracking light keeps blinking sound is warbled. | ||
| SONY |
KV32XBR35
|
Dead set, replaced d1409 | Set dead, relay would click on and off.unplugging connector g5 on g bd caused tv to begin playing.solution: replaced shorted d1409 on audio b+ line. hq comments: located off of ic1401/pin 9 on the a board. |