Beko Repair Tips
Search: beko
Results: 235
Results: 235
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| BEKO |
19221NX
|
No mono sound | C214 150pf in if can | ||
| BEKO |
17125T
|
Severe e-w bowing | Lopt 11.1,110 cpc tfhr8007 | ||
| BEKO |
17125T
|
Dead - loptr s/c - used s2055n | C140 .022µ 400v was o/c | ||
| BEKO |
16628NS
|
Dead | R105 33k 2w o/c | ||
| BEKO |
16328NX
|
Poor field lin | R717 1m hi res | ||
| BEKO |
16328NX
|
No pic unless a1 increased, then same again next time sw on | Ic501 tda4680 | ||
| BEKO |
16328NX
|
No mono sound | Faulty if can - pt no beko63s140 | ||
| BEKO |
16328NX
|
No front panel control - r/c ok | Child lock on - to remove hold "+" & "-" buttons whilst sw on tv | ||
| BEKO |
16328NX
|
Keeps auto tuning to same chan | R61 27k 2w o/c - feeds 30v zener from 200v supply | ||
| BEKO |
16328NX
|
Dead aft loptx changed | Micro sda20563a516 faulty | ||
| BEKO |
16328NX
|
Blank red raster - sound ok | No volts coll t1205 - r1215 22k 1w on crt base | ||
| BEKO |
16328NTX
|
Blank raster with eht present | Dry joints t104 5v reg | ||
| BEKO |
16326NX
|
Dead/st/by only or partial line coll | C805 330nf 400v dry joints or burnt | ||
| BEKO |
16228NX
|
Pic & sound disappears soon aft sw on | Sound present if txt selected - c208 470n in if module dry joint | ||
| BEKO |
16228NTX
|
Dead | Dry joints bridge rect | ||
| BEKO |
16228NTX
|
Dark pic when r/c used and when osd present | C103 220µ 400v mains smoothing cap | ||
| BEKO |
15325NX
|
No signals | No 30v to tuner - r61 100k o/c, d61 30v zener s/c | ||
| BEKO |
15325NX
|
Dead - psu blown | Sw mode trfmr pri s/c - replace with correct one for screen size or lack of width e/w faulty | ||
| BEKO |
15325NX
|
Bright raster & trips to st/by | R1215 22k o/c | ||
| BEKO |
15325NX
|
Blank easter with white line across top - sound ok | T701 10hm thy s/c replace with esm740st & c123/124 47µ 160v |