Beko Repair Tips
Search: beko
Results: 235
Results: 235
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| BEKO |
20320
|
No b in txt | C501 10nf on main pcb o/c | ||
| BEKO |
20320
|
Field collapse | Replace r734 (1k5), d704 (ba 157). | ||
| BEKO |
16328
|
Dead | S/c lopt use hr7218 | ||
| BEKO |
15225
|
Pic shifted vertically | For up check r717, r722 1m; for down check r725 150k | ||
| BEKO |
14212
|
Tuning drifts | C458 100nf sm near tuner or c460 breaking down (in parallel with c457 - not shown on diag) 0µ47 63v | ||
| BEKO |
12220
|
Trips off at sw on - ht = 125v on bulb | D801 by299 s/c - loptx could be the cause | ||
| BEKO |
12220
|
Top quarter of screen lit & blank - rest black | R717 1m o/c - connected to pin 5 tea2029 also check r722 in series 1m | ||
| BEKO |
12220
|
Top ¼ of screen lit, rest blanked | R717 1m o/c also check r722 1m | ||
| BEKO |
12220
|
Int pic/sound - disappears with flashing on screen and noise thro speaker | Xtal q701 in front of ic701 | ||
| BEKO |
12220
|
Col int | Dec panel plugs int | ||
| BEKO |
12220
|
Blank screen with buzzing and then overheats | R725 hi res | ||
| BEKO |
10214
|
Picture shifted down | R725 150k | ||
| BEKO |
10214
|
Goes off & on int | Ta914 off button on front panel - can substitute ta912 av button if not used | ||
| BEKO |
11,1
|
E/w faulty & int blows loptr | C140 22nf across e/w mod diode | ||
| BEKO |
11,1
|
Dead | R101 4r7 safety res in line dr feed o/c due to line dr tfmr having shorted turns (pri winding should read 4r2) pt no be051709 |