☰

Beko Repair Tips




AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: beko
Results: 235
Make Model Symptom Problem Solution By
BEKO 14.2 
14.2  		Picture is shifting on sides Check if r514 contacts heatsink or not Mário Tavares
BEKO 14.2 
14.2  		Picture is comming 1 min later after running on standby Check and replace ic401 Mário Tavares
BEKO 14.2 
14.2  		Av does not work Check and replace ic101 Mário Tavares
BEKO 14.2 
14.2  		Picture is bad Check and replace r162-47Ω Mário Tavares
BEKO 14.2 
14.2  		Tv works sporadic on standby Check and replace th601-mcr22 Mário Tavares
BEKO 14.2 
14.2  		No picture 1) check and replace c143-100nf 2) check and replace ic101 Mário Tavares
BEKO 14.2 
14.2  		P+ is put on the use Check and replace ic101 Mário Tavares
BEKO 14.2 
14.2  		Left speaker sound distorted Check and replace c326 Mário Tavares
BEKO 14.2 
14.2  		After switching on at the first time there are lines on the upper part of picture Check and replace ic501 tda 8359 Mário Tavares
BEKO 14.2 
14.2  		Picture is getting bigger and smaller when turning up the sound Check and replace r606, r607 0.47r Mário Tavares
BEKO 14.2 
14.2  		Picture is going and returning frequently Check r529 1r if there is a cold solder or not Mário Tavares
BEKO 14.2 
14.2  		Unfocused snowy picture Check and replace r162-47Ω Mário Tavares
BEKO 14.2 
14.2  		No sound Check and replace c178-4.7 nf Mário Tavares
BEKO 14.2 
14.2  		Does not work by remote control 3) r606-1Ω t601-k2750 kontrol edin Mário Tavares
BEKO 14.2 
14.2  		Picture is enlarging and then getting normal. power supply voltages are normal. Please check bad solder on pins of c519. Mário Tavares
BEKO 14.2 
14.2  		Colours disappearing Please change the c412 connected pin 62 and 63 of ic 101 ( ic tda9563h/n1) from 56 pf to 39 pf and c413 from 33 pf to 39. note : if the colours are still not correct, please insert 47 pf on pos. c412 and 22 pf on pos. c413. Mário Tavares
BEKO 14.2 
14.2  		Audio problem When the unit warms up the sound disappears first, then it stops reacting to the remote control or the frontpanel buttons. picture can still be seen. then you turn power off (mains button) and after you turn it back again, no sound, no reaction to remote and the picture disappears too. check and replace c304 which is connected to pin 24 (reset input) of ic301. Mário Tavares
BEKO 12.5
12.5 		Doesn't work, LED doesn't light R601-(4,7m)
BEKO CHASSIS 12.7
Lack of linearity at the top of the image Cond. smd c508 (15nf) popped
BEKO CHASSIS 16.1
Low voltage on g2 C712 2.2nf with leakage, this cond. It measures well but under load it causes the symptom