Cce Repair Tips
Search: cce
Results: 4816
Results: 4816
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| CCE |
HPS1407F
|
Doesn't start. When activating power, the LED flashes, comes on again and does not turn on. | Q802 (bc337) does not release the 8 volts for the hvcc. | Eletrônica R-Tec | |
| CCE |
HPS1497
|
Horizontal closed, only one line appears | C416 410nf | The replace of the same | wemersonwcp |
| CCE |
HPS1497
|
Starter turns on and blinking LED cuts off | D402 | Measures normal, replace for another of the same only fiilleeee | Marcos Jardim |
| CCE |
HPS1403
|
The LED just keeps blinking. | C423. ceramic on the 180v line. | Replace and run for the hug | <small> |
| CCE |
HPS2991
|
No start sound. but as it warmed up the sound came little by little. | C655 (470x25v), next to the sound ci. As a precaution, also replace the c661 (470x16v), behind the sound ci. the c661 is bad for causing this defect, but in my case it was the c655. | Eletrônica R-Tec | |
| CCE |
HPS-1497 = HPS-1471 FONTE
|
Does not turn on standby led off +b with 200v and does NOT have 16v @@@ | D808 the power supply of this two models are the same | ELETRONICA ARNI / LEOBERTO LEAL-SC | |
| CCE |
HPS2971N
|
TV turns on, but does not light the filament or high voltage | Replace c-409 exhausted, problem solved. | João S.F | |
| CCE |
HPS2971N
|
Does not turn on, only stand by, normal power supplys | Open resistor r 835 | Replace the same | TIAGO.ELETRO |
| CCE |
HPS2971N
|
Does not turn on, only stand by, normal power supplys | Open resistor r 835 | Replace the same | |
| CCE |
HPS 2997 FS
|
Low brightness, dark screen. | R436,437 open | LIMA | |
| CCE |
HPS-2971
|
Filament lights up and goes out a few times and the TV doesn't turn on. | Falta da power supply de 8, sv | Open resistor fr431. | Persio (TVCompany) |
| CCE |
HPS - 1403
|
Black and white image | Cristal x 502 ( 3.575611 | Replace the same | BARRETO CRUZ |
| CCE |
HPS - 1403
|
Burning fuse | Capacitor - 821 (561/lsk) | Replace the same | BARRETO CRUZ |
| CCE |
29USP
|
Image with black line changing color and blinking! | C310 e c311 smd (470pf) | Replace and run for the hug | Rafael Feitosa |
| CCE |
29USP
|
Greenish screen with line of retraces | Fr901 | Replace of the same | Rafael Feitosa |
| CCE |
HPS2991
|
LED on and doesn't turn on, then image shifted to/right | Q401(mpsa42) and then r401 18k | Ádrian Chapadão do Céu-Go | |
| CCE |
HPS2185
|
Triggering the relay when pressing the power key | Broken flayback ferrite | Bruno Niaci | |
| CCE |
HPS2991
|
Dark screen | C421 | So replace | eletronica vieceli |
| CCE |
HPS2171
|
With blue screen closed on the sides about 3 centimeters on each side, putting signal blocks | C825 47x160 | Replace c825 | celito |
| CCE |
HPS 2991FS
|
TV turns on but with white screen and lines of retraces | R901, 22r open | 22r resistor open, replaced it was ok. | valmirrs |