Cce Repair Tips
Search: cce
Results: 4816
Results: 4816
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| CCE |
HPS-2199FS
|
Very dark and blurry image, normal characters | R423 of 4k7 on the open abl line. Resistor replaced and TV working. | Carlão | |
| CCE |
TV-1418USP
|
Does not work power supply does not generate | Resistor fr804 2k2 | 3R | |
| CCE |
STILE D4201
|
The TV turns on, the lamps blink, turn off and the green LED on the power supply board blinks 3 and then 7 times and the TV does not generate an image | Cold solders at different points on the board. | Resolder the entire inverter system, and in particular the terminals on the small board that sits vertically on the power supply board and the voltage control integrated so that the TV returns to normal | Ivan Bustamante |
| CCE |
HPS-2171L
PCI HPS 31 |
It would turn on then turn off showing black bars on the sides of the TV | After testing the power supply, I found nothing with problems with diodes, resistors, I decided to measure the capacitance of the capacitor number c825 (47/160v) wsound it was completely shorted, after replacing it the device returned to normal | Replaced the capacitor with problems, solved the c825 problem | ALARSATEC |
| CCE |
TVS2910
|
Image shifted to the right | C402, c407, r401, change without testing! | CatracaBj-Share | |
| CCE |
HPS 1403
|
It doesn't turn on, the LED flashes quickly, sometimes if it takes a while it turns on. | Diodo dz801 18v aberto r801 27k e r802 1k2 c806 e c807 47/50v | MARCONES DE ARARIPINA-PE | |
| CCE |
TV2918US
|
Image a strip on the left side | Open r401 18k is in the middle of the plate on the front | Replacelo | orlando lott |
| CCE |
HPS2185FS
|
Dull but you can see the characters | C424 can replace without fear! | <small> |
|
| CCE |
HPS 1471
|
Turns on, turns off and the LED blinks | I replaced transistors q101, q802, q804 | Valtair lopes | |
| CCE |
STILE 32D
|
Turns on stand by but turns orange and does not turn to red to turn on | U5 limiter 1.8v and r24 2.2Ω | Mega Center | |
| CCE |
TV2918USP/AV
|
LED TV lights up, but doesn't turn on. tries to leave, ticking, no flay. | C-825 100v 160uf without capacitance. | NILMAR ELETRON SAT | |
| CCE |
HPS-21AVP
|
Turning on and off | 8v2 zener diode (807) and 3r3 resistor (r824) electronics cardoso - claudio luis | Claudio Luis | |
| CCE |
TV-2118 USP
|
Cushion effect | D409 | Replace | Mauro Mascarenha Tel : (88) 981422821 Parazinho - Ce |
| CCE |
TV-2118 USP
|
Excess width | C437 de 56nf | Replace | Mauro Mascarenha Tel : (88) 981422821 Parazinho - Ce |
| CCE |
TV-2118 USP
|
Horizontal closed with just a line in the middle of the screen | 330nf c429 | Replace | Mauro Mascarenha Tel : (88) 981422821 Parazinho - Ce |
| CCE |
TL800
|
Doesn't start. only 5 volts and power on, tsound are 12 and 24 volts. | D8 (stps20l60ct (screwed to heatsink)) bad. only detectable at x10k scale. replaced by fch20a10 (due to lack of original). | Eletrônica R-Tec | |
| CCE |
TL800
|
Doesn't start. only 5 volts and power on, tsound are 12 and 24 volts. | D8 (stps20l60ct (screwed to heatsink)) bad. | Eletrônica R-Tec | |
| CCE |
2118USP/AV
|
No sound, doesn't even tune a channel image in normal a/v but no sound | A broken track on transistor q 101 that connects to line 102 | And just restore the track | <small> |
| CCE |
HPS 2198
|
Turns on screen flashing and changing colors | Cold solder near the micro resolder | Note: cold solder does not appear, resolder it anyway | GSAELETRONICA GRANJA CALOFORNIA |
| CCE |
LH42G
|
TV won't turn on, totally dead | Absence of voltages of 5v, 13v and 24v. only at 5vsc (transistor q4 on the power supply board with leakage between gate and power supply) | Replace the transistor or place a 22r resistor between vsc and ps on. | Ivan Bustamante |