Cce Repair Tips

Search: cce
Results: 4816

Make	Model	Symptom	Problem	Solution	By
CCE	HPS 2991FS	TV turns on but with white screen and lines of retraces	R901, 22r opened, replaced it was ok.		valmirrs
CCE	HPS2007-2071	No horizontal excitation	C410 of 100pf with imperceptible leakage, voltage drops in the collector of q401 tr diver to 20v in stand by, and 10v activating the power.	Turn it off to see if it goes up, replace it	jasvan souza
CCE	29USP	Cushion effect on the sides	Transistor near the flyback, the one that remains on the heat sink, its value is d2060 with open emitter.		ELETRONICA DIGI SOUND NOVA TIMBOTEUA PA
CCE	HPS2097	It turned on, it worked perfectly, but when I turned off the TV, sometimes the stand-bye LED would blink and go out, leaving it completely out of stand-bye. removing the cable from the socket and waiting about five minutes, putting the cable back in, stand-bye returned.	C806 100k ceramic with leakage.	Replaced it, it worked perfectly.	nachbar
CCE	HPS 2171	Noisy and tremulous sound	Speaker with loose coil	Speaker	antonio cpxb
CCE	HPS1491	TV is only black and white, no color.	D506 7.5 volt zener with leakage and c506 0.47ufx25 volts without capacity.	The diode was replaced and a 2.2 μF 25 v capacitor was placed in place of c506, and it was fine....	Armando de Olimpia Eletrnica EvoluSom.
CCE	HPS 2070	It doesn't turn off by the remote control, and by the power button.	Obeys the function but does not turn off the device, the screen is white without video.	Replace without testing the transistor (q-704) bc 547/ or bc 548	Ademar Videira SC
CCE	HPS-1471	TV turns on oscillates, has image and sound, after 10 seconds the image closes from left to right.	Change capacitor (c-417) 330 pf x 2kv is close to the fly back		Ademar Videira SC
CCE	HPS 1471	Oxila e para, oxila e para, +b ranging from 80 to 102 volts,	Change capacitor (c-417) 330 pf x 2kv is close to the fly back.		Ademar Videira SC
CCE	HPS 2073	Power supply oxilates up and down in the primary, consequently with a low power supply in the secondary.	Replace the electrolytic capacitor of the primary power supply (150 uf x 400 v) and the two electrolytic capacitors of the secondary (33 x 160v) and the (47 x 160v)		Ademar Videira SC
CCE	STILE D32	Sometimes it doesn't turn on, just standby, and sometimes it turns off after being on for a while	The entire power supply PCI was resoldered, when the board was bent it showed the defect of disconnecting, it could even be a defect in the soldering of the SMD components.		Bruske
CCE	HPS21AVP	Takes time to turn on and access menu functions, does not tune channels	Memory (for testing, you can turn on the TV without the memory)		Ronie Grein
CCE	HPS2971	Does not reset	Memory		jps, eletr,c,grande
CCE	HPS2910FS	Heating q402 and q406 too much	C407 3n3 x 1k6v alterado		paulorusso
CCE	HPS2001	Power supply oscillates but no image appears	Fr401 open	Just replace
CCE	HPS-2991 FS	Closed vertical.	All voltages were normal.	The vertical output (tda8359j) was replaced and the problem was resolved.	Rafael Silveira
CCE	21	Burning at a resistance of 10r perto do flay	Vertical only works with her own stv 8179		carlos eletronica carlos
CCE	HPS 2070	Vertical with only a band of 5 centimeters or so,	Change tda 8361		Ademar Videira SC
CCE	HPS21AVP	Turns on and off with blue screen, standby flashing non-stop.	Replace without testing capacitor c417-330pf/2kv,.331k	And also the touch switch to turn on the TV because if it is resisting it could cause the same defect.	RISONALDO DE FREXEIRAS/ESCADA PE
CCE	HPS 2991	Dark band on the left side of the screen	C402 replacement of 331p x 2kv capacitor, following the tip from my friend Carlos Guerra		Lino Bugatty