Cce Repair Tips
Search: cce
Results: 4824
Results: 4824
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| TV CCE |
HPS2997FS
***** |
Does not turn on, LED lights up weakly, with noise (tick tick tick...) | Capacitor 406 - 330p 2kv burst. | valter | |
| CCE/BLUESKY |
HPS-2991
|
Burned fountain | Tea1507 2 fet6n90 capacitor c-406 330pf/2kv | Cause of the burnout of the c-406 330pf/2kv power supply | ETERNO |
| CCE |
HPS21AVP
|
Dark stripe right side | C417 - 330pf / r414 - 18k | Replace mentioned items | eletronicaapolo |
| CCE |
TV2118USP
|
Blinking LED does not start adjusting screem works but then does not turn on again | I just changed the c 829 33uf 160v | nilson sakura | |
| CCE |
HPS 1497
|
Turns on and off and on again before the image appears. but it doesn't turn on. | Cold sound on transistor q802 and surroundings. | Filhote | |
| CCE |
HPS1471
|
Doesn't work, b+ voltage pulsating | Ic 802 tl431 | When testing it, it is normal but do the following; test tip - on pin 1 and tip + on pin 2 and heat it up, then the leak appears. | jannilson |
| CCE |
HPS-1402
|
The LED only stays on power supplys ok | Defective computer | Resistronic Resende | |
| CCE |
HPS 2971
|
No audio | Change without testing q802 q803 q804 and go for the hug | ADEMAR | |
| CCE |
HPS2971
|
Blurry image looks like a tube but it's not | R423 of 1k open on the abl line | I just replaced it and I'm ok | charles cbs |
| CCE |
TV-2118
SL23-1 |
The device had the LED blinking directly and the +b had less than 100v (between 70 and 80) and the voltage on pin 1 of the photo coupler was around 2v | Tl 431 | adhemar caetano da silva (tecmil eletronica) | |
| CCE |
TV2118USP/AV
SBT STD |
LED keeps flashing without pressing power and low supply | Replace c808 22/50v | DAVI DE PEIXE -BOI PARA UM DICA PRA VÇS | |
| CCE |
HPS-2997 FS
|
Takes time to come image | Replace l400 with a jumper | Baguatech | |
| CCE |
HPS 1403
|
Audio normal pores sem video | Capacitor de video 33micro 160w | I replaced the video capacitor and it went back to normal | bruno |
| CCE |
HPS 1402
|
The TV works audio video normally the TV is drizzled in trai | Replace the microprocessor | Resovido | DAMIAO BEZERRA |
| CCE |
HPS 2071
|
Flashing LED, with white screen and horizontal lines. | Ic 101 ( 9570h/n3/a). | Replace the same. | BARRETO CRUZ |
| CCE |
HPS2172FS
|
Intermittent saw teeth | Change the smd ceramic capacitors close to the micro | ||
| CCE |
HPS2071
34B1 |
Vertical does not open | Initially the TV did not arm the power supply. Tsound was no +b, horizontal drive burned out. I replaced the aforementioned and the flyback. However, the TV would only start the power supply and disarm with protection. | I contacted that the q802 (bc 337-25) was not conducting at the transmitter. I just replaced it, tv 100% | ZAK som |
| TV CCE |
HPS2073
|
Doesn't start. | LED is on and goes off when turned on, but tsound is no sound or image. | The 5v6 volt zener dz802 on the 5v line was replaced. and it looks new! | Adilson (formiga-mg) |
| CCE |
HPS 2004
|
Image without definition, completely out of focus with vertical blue red green color bars, normal sound. | Ci vertical tda9309 ruim. | edsomvideo | |
| CCE |
TV2O18USP
|
Cushion effect | Cap407 33p/stand | I spent 30 sentavos on a 56p one and I got 49.70 R$ |