Cce Repair Tips

Search: cce
Results: 4816

Make	Model	Symptom	Problem	Solution	By
CCE	HPS2991 FS	It has audio, loud, filament and no brightness	Q409	I replaced the capacitor and everything went back to normal.	ELETRÔNICA NUNES
CCE	HPS 2971N	Sometimes it doesn't turn on, when it does turn on it sometimes changes the colors	Rgb trs on tube plate unsoldered	Resolder the three	jasvan souza
CCE	HPS 2991FS	Brightness and color saturation	Abl resistors 1k / 10 k== make adjustment in setup (service mode) in contrast and brightness)	Replace, adjust the E run for the hug.	TV TECNICA BRACEL - BRASILIA
CCE	HPS 2997 TODOS	Horizontal transistor burns out without apparent cause after a few hours	Measure the power supply, in my case it was 141 volts, I got it! should be on average 132volts		tamaralan
CCE	HPS 2997	Tries to arm it two or three times and it hangs up	Check 13 volts coming from the flyback, be careful with the vertical ci too		tamaralan
CCE	HPS2171	Image with 3 thick horizontal stripes	TV fell, you need to change the tube		marciorv
CCE	HPS2901	Without image, increasing scrim image with ret line and image in the background without rgb	One of the tda6106q on the kinescope board	Replace	ladmyr eletrônica universal bh
CCE	HPS2901	Does not turn on, when turned on outside of horizontal frequency it beeps	C-429 of 220pf close to the fly back	Replace without measuring	ladmyr eletronica universal bh
CCE	HPS 1407	TV with normal functions. Just with the screen high and it doesn't work.	Fr 901 22r on the open kinescope plate. does 180v.		JN ELET.NEVES CE
CCE	TVS-2910	Snoring and won't turn on or standby	Capacitor 331/2kv c402	Replace without testing.	MARCELO BIRIGUI-SP
CCE	HPS-1495B	TV with a reduced frame on four sides and an intermittent sparking noise near the q402 horizontal outlet, after a certain period of operation smoke starts to come out of the deflector.	Horizontal deflector with shorted turns.		This email address is being protected from spambots. You need JavaScript enabled to view it.
CCE	HPS 2997	The filament lights up and tsound is no image or sound	Flat that goes from the main board to the tube board, cold solder		HP ELETRONICA
CCE	2971	Image shifted horizontal wall bending	C-402 330pf-2kv	Barter it	WARLEY CESAR
CCE	HPS2003 D	TV does not come out of standby	Dz 702	Resolder it or replace it.	eletronicaapolo
CCE	HPS2171/2073/2071		Oscillates width and +b1 according to brightness	Desolder and measure r812 r813, and if d816 and d817 are open they will certainly be shorted	jasvan souza
CCE	HPS1405	With reduced u-shaped frame closed on the sides and bottom.	Tda8841 with low horizontal frequency.	I replaced the tda8841 and everything went back to normal.	<small>This email address is being protected from spambots. You need JavaScript enabled to view it.</small>
CCE	HPS2003	When activating power, the LED turns off but the TV does not turn on	All secondary voltages were ok as well as the power supply to the two cis	Transformer t401 horizontally with one of the windings open after the replace, the TV started working again	JOSÉ GUSMÃO
CCE	HPS2971	Closed horizontal	C409 (560pf) open or with low capacitance	Confirmed orlando	aelson
CCE	HPS 2171FS	Turning off with vertical closed	Fly-back pino 9 +12 0v	Replace	EMERSON RIBEIRO
CCE	HPS 2997	Turning on and off	The two BC's with leakage q802/805	Replace the two bc's q802/805	rúdson