Search: hitachi
Results: 1065
Make Model Symptom Problem Solution By
HITACHI C2146TN
Int shuts down to st/by Dry joints ic950, 951 & 952
HITACHI C2146TN
Int or totally dead Check for dry joints at 5v ic952 & 8v ic951 regs, line dr tr q701 & line dr trfmr
HITACHI C2146TN
Int field collapse Dry joint on r710
HITACHI C2146TN
Int cuts out Dry joints q951, q952 & r952 82k, r950 56k hi res
HITACHI C2146TN
Hor lines/striations across top 1/3rd of pic R611 270r 1/2w across scan coils dry joints (hidden behind plastic frame supporting pcb)
HITACHI C2146TN
Dead - led lit Check 5v reg ic952 & 8v reg ic951, ic950 st/by reg & field o/p chip ta8427k
HITACHI C2146 ETC
Field - lines at top of pic Ic601 field chip
HITACHI C2146 ETC
"c46tn" displayed - in factory set up mode Press the 2 vcr buttons on hset together - when the menu appears go to st/by
HITACHI C2146 / 2546 / 2846
Int nicam reception Caused by solder bridge across pins 24 & 25 nicam dec chip ic4201
HITACHI C2133TN STEREO
Dead , just sby light No 12v to tea2164 ic - veo7 ( bc858 ) s/c. front panel
HITACHI C2133TN -NOKIA
Snowy raster only - no osd Dis clock/data lines from 64 pin nicam proc chip brought back pic - chip faulty (£35)
HITACHI C2133TN -NOKIA
Field only ½ size with osd scrolling - rest of raster blank Field o/p chip ns10 tda8350qrs04 chip resistor (5k6/0.25w) from pin 8 to deck. safety resistor rk68 (10r/0.25w) to pin 8 of chip from 43 volts supply & check the two caps smoothing the 43 volt supply rail from the lopt c069 (220uf) ck68 (100uf)
HITACHI C2133TN
No sound Msp3410 nicam dec chip
HITACHI C2133TN
No line drive Line driver tr s/c but new one overheated & failed; vk11 & vk16 dry joints
HITACHI C2133TN
Line driver trfrmr blows aft 20 mins Diode in damping cct across pri of line dr trfrmr faulty
HITACHI C2133TN
Field - only half fills screen with scrolling graphics & blank raster Ns10 fop chip tda8350q, rs04 5k6 ¼w chip res from pin 8 to chassis, safety res rk68 10r ¼w pin 8 chip &c029 220µ, ck68 100µ
HITACHI C2133TN
Dead - st/by only 12v supply missing pin 16 tea2164 chopper chip - ve07 bc858b sm on front panel s/c
HITACHI C2127T
No sound, no picture; osd and text are ok Pin 21 (blanking) of ic201 tda8361 stuck at 8v, replace ic201 and make sure that the correct "n" version is used, mine was tda8361/n5
HITACHI C2125T 11AK19Y4
St/by only Handset was faulty even though it gave an o/p
HITACHI C2125T 11AK19K
Dead aft it went pop D812 byd33d s/c in 14v supply