Search: mitsubishi
Results: 1346
Make Model Symptom Problem Solution By
MITSUBISHI CT-2131 CHASSIS EURO 4
Repeated destruction of the tr. of lines - changing only lasts about 10 minutes. After the failure you hear the horizontal noise... Change the str54041 ic in the power supply and check the heatsink, also change the cond. c908 (10uf)
MITSUBISHI CT-2131 CHASSIS EURO 4
Image with interference (black bar that moves) and in stand-by the image appears darker. Change the 47uf power supply (primary) capacitor and the 10uf vertical capacitor.
MITSUBISHI CT-2131 CHASSIS EURO 4
4 or 5 feedback lines visible at the top of the screen. Replace c920 capacitor (470uf).
MITSUBISHI CT-2131
Does not store channels Lack of power supply to the -31v memory. cause: t951 with winding between pins 2 and 4 open. replace t951
MITSUBISHI CT2145EPM
High voltage (destroys transistor s.l and breakdown str54041) Analyze r 970=330k or others in the power supply
MITSUBISHI CT-21M1EPM
Image shaking and snoring in the sound. Change c906 (47mf/25v) next to the ci osc. from the power supply.
MITSUBISHI CT 2023 EP-ANTIGA
Without vertical[ dash h] Change :c403 + 412+413
MITSUBISHI CT-21M5S
With sound, blocked video and pulling g2 you can see return and amp lines. vert. diminished Corrupted memory.
MITSUBISHI CT-21M1EPM
Image shakes C905 in food
MITSUBISHI CT-21M1E...
It has no vertical. R402 open.
MITSUBISHI CT-M25ES
Does not leave stby Dump. Attention: it should be a specific dump, otherwise tsound will be missing items in the menu
MITSUBISHI CT-2023EP
No picture/sound ok 100mf/25v capacitor c220 shorted (power supply from ci m51393ap)
MITSUBISHI CT14MS1EM
Dull image with little contrast Sub r563 = 68k e r562 = 220k
MITSUBISHI CT-21M2
It searches for tunes but does not capture channels. Agc problem. open 18k resistor r160
MITSUBISHI CT-1447EPM
Tsound is no contrast. D554 (1n4148)
MITSUBISHI CT2125EET CHASSIS EURO10
Does not synchronize horizontally and image is out of phase C506 and c509 with problems, they are next to tda2579a
MITSUBISHI CT-1447EPM
Tsound is no sound. Transistor q3a3 (jc501-q)
MITSUBISHI CT-21M1EPM
No sound. Only with the volume control at maximum can you hear it, and even then, only with your ear very close to the speaker. Replace l301
MITSUBISHI TC-2090
Turns on after a few minutes, working normally C887 (100uf/16v) Replace with 100μF/35v
MITSUBISHI TC2051
Vertical colored lines R518 (4k7)