Sony Repair Tips
Search: sony
Results: 20077
Results: 20077
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
CFD260
|
Intermittent audio through speaker - replace ic 703 | In cd mode, the right speaker cut in and out intermittently creating static. | ||
| SONY |
CFD12
|
Replacing optic cables possible | Optic cables not available. | ||
| SONY |
SVX20
|
Will not play, no display | Would not play, or show display. | ||
| SONY |
SLVR5UC
|
No svhs playback | No playback y signal on svhs only. | ||
| SONY |
SLV70HF
|
No auido when using tuner | There is no audio when using the tuner. | ||
| SONY |
SLV701HF
|
Drum spins at all times even when power off | Drum keeps spinning by itself. | ||
| SONY |
SLV700
|
Part # n/a for start and end sensors | Servicer wants to know if the end and start sensors areobtainable. if so, what is the part number? currently if one of thesensors is defective the complete base or dm mcb is replaced.please respond. thanks. -hq comments: tokyo has informed us that th | ||
| SONY |
SLV686HF
|
Dead | Unit wouldn't power up. | ||
| SONY |
SLV620HF
|
No audio | No audio caused by hf34 board loose inside vcr. this is abrand new unit out of the box. dealer stock. | ||
| SONY |
SLV575UC
|
Problems during ff and rewind | Unit came back as a customer return, first repair, replacedcapstan motor, pinch roller, gear pully and belt. new complaint - willbreak tapes at the end of ff or rew. noticed that the tape indicator wasalways at the center and the unit willnot slow down | ||
| SONY |
SLV575
|
Remaining tape indicator off | Remaining tape length indicator off when end of tape rwd. | ||
| SONY |
SLV400HF
|
Won't play tape shuts down after start up | Drum starts at high speed - on play back the unit shuts downand display shows 03. | ||
| SONY |
SLV400
|
Part # n/a for start and end sensors | Servicer wants to know if the end and start sensors areobtainable. if so, what is the part number? currently if one of thesensors is defective the complete base or dm mcb is replaced.please respond. thanks. -hq comments: tokyo has informed us that th | ||
| SONY |
SLV373UC
|
Snowy or blue picture from ant. | Snowy or blue picture when receiving signal from ant. | ||
| SONY |
SLV1000
|
Color flicker | Missing c853 caused color to flicker on picture. | ||
| SONY |
SLHF900
|
Dead | No power, unit dead. | ||
| SONY |
EVS7000
|
Stereo displayed | When recording and using the video 1 out and displaying thecounter readout, everything is ok. playing back, the counter is displayedand the stereo indicator is also displayed. the only way to get ridof the stereo display is to go into the edit mode. b | ||
| SONY |
EVS7000
|
Figure 37 on page 36 of the f mechanicial adjustment manualv is in error and misleading as annotated. items one and two in thatfigure are called lock screws when in fact they are tilt adjustmentscrews for the guides tg6 and 7. lock screws are available a | |||
| SONY |
EVS550
|
Dead. unit will not turn on or stay on | Unit came in dead. first, i replaced the power supply. then ihad intermittent flashing of the clock. i noticed that the 5v line at pins57 & 58 was varying by 1v as the clock flashed. finally foundthat d002 had gone high in resistance, causing micro to re | ||
| SONY |
RMY117
|
Remote not compatible with gi cable box or panasonic vcr | Customer has a 1994 panasonic vcr model pv4451, and a generalinstrument cable box model cft-2000, that will not operate using thermy-117 remote. they tried codes 70, 71, and 72. -hq comments: since these are 1994 models the codes they used mustbe new |