Sony Repair Tips
Search: sony
Results: 20073
Results: 20073
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
STRAV760
|
Remote replacement | Customer wants replacement for rm-s760 remote. these unitsare no longer available. is there a replacement for this model? -hq comments: the replacement is rm-s520. the part number isa-4372-026-a. | ||
| SONY |
STRAV560
|
Remote replacement | Customer wants replacement for rm-s760 remote. these unitsare no longer available. is there a replacement for this model? -hq comments: the replacement is rm-s520. the part number isa-4372-026-a. | ||
| SONY |
STRAV460
|
Remote replacement | Customer wants replacement for rm-s760 remote. these unitsare no longer available. is there a replacement for this model? -hq comments: the replacement is rm-s520. the part number isa-4372-026-a. | ||
| SONY |
SPP50
|
Reset pcb change | The circuitry that was previously on a separate reset pcb isnow included on the main pcb. the circuit design appears to be the same. -hq comments: thanks for letting me know about this. i faxed tokyo andthey will send an updated pcb layout. they told | ||
| SONY |
SPPS10
|
Reset pcb change | The circuitry that was previously on a separate reset pcb isnow included on the main pcb. the circuit design appears to be the same. -hq comments: thanks for letting me know about this. i faxed tokyo andthey will send an updated pcb layout. they told | ||
| SONY |
SPP50
|
Handset and base do not communicate | Technician has checked receiver and transmitter circuit inboth handset and base. both operate correctly. data can be seen goinginto micro at id code input pin. any suggestions? -hq comments: check to make sure handset and base both use the samechanne | ||
| SONY |
KV2680R
|
Incorrect p/n in s/m - neck cover, correct p/n 4-334-942-00 | Part number in service manual (page 19, ref. no. 6)9-910-999-51, is incorrect. the same part number 9-910-999-51 is foundin the kv-2680r service manual on page 46, ref. no. 9 .... the samesolution applies. | ||
| SONY |
FD18A
|
Service manual is not available | Service manual is not available. when will it be released? -hq comments: because this is a tourist model and similar to the fd-18there will not be a service manual issued. let us know if you would likea copy of our manual. | ||
| SONY |
RMS760
|
Remote replacement | Customer wants replacement for rm-s760 remote. these unitsare no longer available. is there a replacement for this model? -hq comments: the replacement is rm-s520. the part number isa-4372-026-a. | ||
| SONY |
SL2400
|
Pinch roller assembly | X-3669-307-0 substitutes a-6759-344-a will not physically fit. -hq comments: the spring must be replaced with the pinch roller. theoriginal spring is larger and will not allow the replacement pinch rollerto fit properly. | ||
| SONY |
LCR200
|
Autofocus does not work when using water-resistant housing | When using lcr-200, water-resistant housing, the autofocusdoes not work properly. -hq comments: autofocus should not work with this housing. housing istoo short for v11 try lcr-v11. | ||
| SONY |
SLV70HF
|
Part number for front loading assembly | Is there a part number for the comlete front loading assemblyfor the sl-v70hf? -hq comments: no, the complete front loading assembly will not be avail-able as a repair part. | ||
| SONY |
EDV9500
|
Does edv-9500 record ctl in video insert | Does the edv-9500 record new ctl while doing a video insert? -hq comments: yes, it does | ||
| SONY |
CDPC50
|
Part number for rear foot - reference number 35 | The original part number (x-4922-505-1) for the rear foot(reference no. 35) gets substituted to part number x-4922-508-1. thisfoot is too large in size. it is the size of the front feet of the unit.we need the correct part number. -hq comments: the re | ||
| SONY |
KV2782R
|
Incorrect part number in service manual | Part number in service manual (page 19, ref. no. 6)9-910-999-51, is incorrect. the same part number 9-910-999-51 is foundin the kv-2680r service manual on page 46, ref. no. 9 .... the samesolution applies. | ||
| SONY |
SPP60
|
No part number for speed dial label | There is no part number in the service manual for the speeddial label on the handset. -hq comments: faxed tokyo. their response was that this will not be asupplied part. they suggested that the customer make it themselves. wewill suggest to tokyo that | ||
| SONY |
SPP100
|
Replacement microphone is too small | The original part number (8-814-186-00) substitutes to a newpart number (1-542-092-11). the replacement microphone is too small. isthis a correct substitute? -hq comments: i have contacted tokyo with this question.11/20: the part number no longer subs | ||
| SONY |
RMX2
|
No part number for 12-pin socket | There is no part number listed in the service manual for the12-pin socket on the tuner in pcb (b board). the part number listed inthe service manual for reference no. 909 the pcb (1-625-386-11) is for theblank board only. | ||
| SONY |
CDPC7ESD
|
Broken pulley chucking | I have found the pulley chucking broken in several units. ihave replaced the pulley chucking and on a few units they have come backin a few weeks with the same problem. i found by melting and spreadingout center of the pulley chucking so it overlaps th | ||
| SONY |
CDPC70
|
Broken pulley chucking | I have found the pulley chucking broken in several units. ihave replaced the pulley chucking and on a few units they have come backin a few weeks with the same problem. i found by melting and spreadingout center of the pulley chucking so it overlaps th |