Cce Repair Tips
Search: cce
Results: 4824
Results: 4824
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| CCE |
HPS1470
|
Cool image from the side | R427 4k7 open | Replace | EletroClaudio Aguas Belas |
| CCE |
TV-2118USP/AV
FBT STD |
Image moved to the right saw the tip here. and I resolved | C 417 | Naum Veras | |
| CCE |
HPS-144
|
Doesn't work, doesn't turn on LED blinks when turned on... | Trans. bc 337 q-802 | Do not test, replace for new | joelton |
| CCE |
HPS 2171
|
LED flashing and does not turn on (minus 12 of the flyback is missing) | Change the flyback i good | J D M | |
| CCE |
HPS2980
|
Noise at the cricket-like power supply, when turning on, changing channels and in bright scenes | C860 22/25v | BETOTECK | |
| CCE |
HPS1471
|
Horizontal with side stripe with drizzle on the stripe!! | I replaced the fly back with tat1412 and replaced the 9n1 wide capacitor with a 6n8 one | Replace fly back and width capacitor with 6n8f | orlando |
| CCE |
HPS2005
|
Blurry image as if it were focus or lack of 180v | R305 of 1k5 open vertically | Just replace it and that's it!! | orlando |
| CCE |
HPS2003
|
Standby LED turns on and off without the TV working | Open emitter transistor | Replace q 802 | MARCOS ELETRONICA |
| CCE |
TODOS
|
Replaces tda9309 with 9302 | Replaces tda9309 with 9302 | Reverse pin 1 with pin 7 and run to the hug | Roberto Consertos |
| CCE |
HPS2003
|
Doesn't work | Standby LED turns on and off without the TV working | Replace q 802 | MARCOS ELETRONICA |
| CCE |
HPS 2997FS
|
LED is on but won't turn on | Q804 with escape killing 3v3 | francisco.s | |
| CCE |
HPS2918USP
|
Side strip with shadows | R.401 | julio itaguai | |
| CCE |
HPS2901
|
Does not turn on LED lights up when pressing the button turns on the LED turns off the relay hits and does not turn on, 130v voltage on +b oscillating the analog multimeter pointer | C826 - 100uf / 160 volts com terminal interno corroido | Replacing it solved the problem | washington de sousa |
| CCE |
HPS21AVP
H-2197A |
With side strip separating the screen | C418 330pf 2kv r414 18k | FERNANDO | |
| CCE |
HPS-1497
|
Left sidebar | Capacitor c417 open | Replaces | Alvaro (prolar) |
| CCE |
HPS-1471
|
LED does not turn on blinking low power supply 3v3 low is not the bc337 | Replace capacitor c805 150uf 400v seco | Replace c805 | beto2828 |
| CCE |
HPS1497-HPS1458
HPS14 |
Dead | Dz801(18v) shorted and d808 with anode loose above the solder | I can't access the service menu to improve the brightness, if anyone can, please post a way (in the service key it doesn't work) | ÁdrianChapadãodoCéu |
| CCE |
HPS1407
|
Frame dimensions varying in bright scenes, presenting noise in the audio. | Resistor r 215 (4.7 k) with changed value. | mickey27 | |
| CCE |
HPS21AVP
|
Width fluctuates as the image changes | C417 331k x2kv | Replace c417 | celito santo angelo |
| CCE |
TV2918USP
|
Turns on turns off alone no image no sound | C402 aberto | 330pf x 2kv coloquei 2 de 1k x 2kv | ELETRONICA MAURI JUNIOR |