Cce Repair Tips

Search: cce
Results: 4816

Make	Model	Symptom	Problem	Solution	By
CCE	HPS2197	Zooming out and turning off	Tea 1533at		silva2
CCE	HPS2197FS	When connecting with the antenna, it turns off, without the antenna it remains connected.	C825 47/160v sem capacitance		CHARLES CIPRIANO
CCE	HPS2071	Horizontal out of position with a black line and interference on a blue screen	Capacitor c417 shorted r414 open	Replace doe c417 and r414	Ronytec
CCE	HPS 2997	LED is on but won't turn on	Apartments 100/160	Replace of the same	tecnosat
CCE	29USP	Dark band on the left side of the screen (image shifted to the right)	C402 of 330pf/2kv it is responsible for the hsync pulse from the processor to the horizontal output collector. It is close to the horiz output transistor.		eletronica fernandes
CCE	HPS2185FS	16v low voltage, TV inoperative, 118v normal	Replace ic101(microprocessor)smd		This email address is being protected from spambots. You need JavaScript enabled to view it. Marcondes Jaicós-PI Ohm eletronica
CCE	HPS2007	It doesn't turn on when you press the power button, the LED turns off but it doesn't turn on	Q 802	Transistor bc 337 open	ELETRONICA HAVAI
CCE	HPS-2971	LED on, TV doesn't turn on 3v3 low	R831 changed	Replace	PAULO MACEIO/AL
CCE	HPS2185FS	Does not turn on, does not oxidize the power supply, no voltages on the secondary.	C806 short connected to pin 2 of the power supply ic reg.		Bruske
CCE	HPS 2071	No image no sound screen looking like rainbows all colored	There is no rainbow effect image	Vertical replace 7804	celito
CCE	HPS1405D	Power supply oscillated did not form standby	R.805-33k aberto	Replace of the same	paulo (francisco morato sp)
CCE	HPS1407	It looks like there's a leak in the flyback; I changed it, it wasn't	Ic-801 uc3842bn	Power supply has 118v, but is 103v	macceletronica
CCE	HPS-2004B	The LED lights up but the device does not turn on, the device's on/off switch does not work.	Without 8v power supply voltage and micro power pulse does not act on transistors q803 and q802.	Malfunction of the micro reset circuit due to cold soldering on the 3v6 dz-702 zener diode.	celinvds
CCE	HPS1497	Without oscillating horizontally.	C410 with leak	After replacing everything worked ok	DANIEL SOLANEA PB
CCE	HPS14RD	Does not turn on, has +b LED does not light up	D815	Shorted diode	matieski
CCE	HPS14RD	Reduced frame (bottom and side)	Ic 502 tda 8361	Replace	matieski
CCE	HPS2071	Turning off after a few minutes or not turning on at all	Replace the tr q802 and q804 with bd135 or bd139		CHARLES CIPRIANO
CCE	HPS-2092	TV when turned on, comes with 3 retest lines in the middle of the screen and then there are retrace lines at the top of the screen like if it were a bad capacitor	In fact, the resistance r308 of 100 r which takes 45 volts to the capacitor c310 which was burnt and the capacitor was not being powered, it was just a matter of changing it and it was gone.		This email address is being protected from spambots. You need JavaScript enabled to view it.
CCE	HPS2760	Burning the said horizontal and b.u	I changed the b.u and enabled it with kpf of 13 for 1500v	Just put the original	gabriel
CCE	HPS2760	Burning horizontal output and b.u 2520	I changed the b.u and enabled it with kpf of 13 for 1500v	Just put the original	gabriel