Cce Repair Tips
Search: cce
Results: 4816
Results: 4816
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
CCE |
LT29G
|
Back light comes on, no image. | Capacitor smd na placa do display | Shorted capacitor cg21. | Vander CDs de Quixadá CE |
CCE |
HPS-21AVP
|
Dead | Fly-back | Replace o fly-back bsc25-0206h | Sinailson furtado |
CCE |
TV-2118USP/AV
|
Turn on with a screen full of colors | V541, n301, c547, r430, r542, c302, | Replace the v541, which is the b892, if you don't have the b892, replace it with three bd140s in parallel. replace the vertical stv8172a, replace the c547 of 470μF25v, replace the r430 of 22k, replace the r542 of 10k, replace the c302 of 100μF25v, the TV will be working normally. If the TV has a buzzing noise at the power supply, like a vibration, just replace the L501 coil. | Sinailson furtado |
CCE |
TV-2118USP/AV
|
Turns on with the screen sparking and squeaking near the deflector connector | C417 | Replace the 331k c417 capacitor and that's it, the TV will work normally | Sinailson furtado |
CCE |
2118USP
|
Lines at the top, and colored strokes. | C302, c304, r430 | Replace the capacitors c302(100x35v), c304(104j), r430(I put 6k2) | Edson Gomes |
CCE |
HPS1471 HPS2071 HPS2073
|
Turning it off heats up the dz801 zener diode after a thorough fine-tooth comb, finding nothing wrong! | The FR801 resistor was changed from 10 r 1/8w to a 100r 1/8w resistor | After changing functionality plz | orlando lott |
CCE |
HPS1497
|
The image appears to be only half up and full of risk | What to do | Diney | |
CCE |
HPS-2071
|
Alloy with lines of retraces is a far image | Fr901 | Replace the fr901 on the rgb board | Sinailson furtado |
CCE |
D32
|
Performs functions alone. For example, decrease and increase the volume, enter the menu, select inputs, among others. | Problem with the side buttons. | Replace all buttons. | Henrique |
CCE |
HPS-2037
|
Turning off by itself after 2 to 5 minutes, returning to stand-by. | Q802, bc337 changed. located next to the Chanel button. | I replaced it and the TV looked great | Nilson Rodrigues |
CCE |
HPS 2071
34BI |
LED was just blinking secondary power supply + pulsing it was only giving 70v dc | TV hand could oscillate due to lack of 103 v in the choper's secondary that goes to the horizontal output | In my case, it was just to replace the capacitors c825 of 47μF for 160 v and c 829 of 33μF for 160v and run to the hug, God and faithful | eletronica sto ant rj |
CCE |
HPS 2071
34BI |
Image disappeared and then came back, it was just a blue screen, tuning and no channel input, I changed varicap q101 and nothing image came and came back | The 5v was missing after it was turned on for a while, that's when I decided to change dz102 5v1 d1011n4148 and c 107de 470uf for 25v and it was fine | Replace without testing dz102 d 101 e c 107 God is faithful | eletronica sto ant rj |
CCE |
D4201
STILE |
TV does not turn on orange standby LED | The standby LED turns orange without a command on the TV control, it doesn't turn on.. it should turn red and when turned on it turns orange and then green | Replace voltage regulator on main board u5 ld1117al 1.8 volts God bless the friends who posted this tip sound on the forum | Aguiar |
CCE |
HPS2185FS
|
Blue image far away with retrace lines | Resistor r922 15k in rgb open tube board | Replace 15k r922 | beto2828 |
CCE |
HPS-1471
|
A black stripe on the left side of the screen shaking | After a lot of head banging I found the r-414 open total 18 k resistor | Just make the replacement and that's it | ELETRÔNICA CAVALCANTE MARTINÓPOLE-CE |
CCE |
D3201
|
Flashing video | Cold solder trafo t1, causing variation in 12volts | Solve trafo | Diego Boeira |
CCE |
D3201
|
Flashing video | Cold solder trafo t1, causing variation in 12volts | Solve trafo | Diego Boeira |
CCE |
STILE D32
|
Turns on, turns off normally, lights come on and go off, the green LED on the power supply flashes and meets the normal control type | Switch power supply | Switch power supply | ASL ASSISTENCIA TÉCNICA TONINHO |
CCE |
STILE D32
|
Power LED does not light up | Change power supply | Replace font | ASL ASSISTENCIA TÉCNICA TONINHO |
CCE |
STILE D32
|
The stand by LED turns orange without command on the control, it doesn't turn on..it should turn red and when turned on it goes through the orange then green stage | Replace the main board | Replace the main board 1107314704 | ASL ASSISTENCIA TÉCNICA TONINHO |