Cce Repair Tips

Search: cce
Results: 4816

Make	Model	Symptom	Problem	Solution	By
CCE	HPS1401	When you press power, the TV doesn't turn on and the LED just blinks 3 times	In my case it was the flyback and the vertical sweep ci		AdrianChapadão
CCE	HP 29 E	TV doesn't work std-by light blinks continuously but dimly	Ic-603 sound output short		jaironuness
CCE	HPS2070	Vertical closed	Tc 4053 bp		antonio nobrega
CCE	HPS14R	It doesn't work, the horizontal output has been replaced.	No high voltage		ransabom
CCE	HPS 2095	Tv doesn't work vl	Changed ic- 703 la- 7910		jaironuness
CCE	HPS 144	When you turn on the TV, the sound and image are normal and in a few seconds the TV turns off. solution to the problem, replace the transistor 802 c 33725 with bc 547 even though it is good in the test	Solution to the problem, replace the transistor 802 c 33725 with bc 547 even though it is good in the test		Francisco Ivan Basílio
CCE	HPS 14 R	LED lights up dimly and there is no 113, go back to + b	Replace the c846 capacitor		COSMO
CCE	HPS1471	LED only blinks and no image appears, vertically closed	+b 8 v pino 9 do ic 101, l702 aberta		BRUSKE
CCE	HPS 2090	Turns off by itself	Lack of DC on pin 4 of the fly back	Replacement fr 400 and cap 809	paulo artur rio de janeiro
CCE	HPS-2080B	Does not have green color	Defect ci tda8361 4x		ELETRONICA ARNI- L. LEAL
TV CCE	HPS- 2007	The TV turns on the light STBY when you turn it on, the light goes off and the TV doesn't work. Note: there is + b on the horizontal output collector.	Replaced the q802 - bc- 337. TV worked normally.		jaironuness
TV CCE	HPS 1481	Luminance or white screen with vertical lines with excessive brightness	L 501 open. Note: this goes on the tube plate.		jaironuness
CCE	HPS2971	No sound	C661 with leak	Replace the same	livo tecnovideo ps
CCE	HPS 14R	Power supply lowers less than 60v.	Does not have 115v and 24v		robson
CCE	HPS-2199FS	No image, LED blinking, does not turn off	Capacitor do screen		Ronie Grein
CCE	HPS 2985	+b ok, it can't keep it on, it turns on and then turns off, or stays on for a while and turns off randomly	In this case it was a tube socket, remove the focus wire from the socket and check if it stays connected.		BRUSKE
CCE	HPS 2001	No characters	Change resistor 825		miguel
CCE	HPS	No characters	Memory that works together with the microprocessor	Replace of ci position ic-701 br24lof8-w	simas
CCE	HPS-1403 C 00053190	Green fabric	Green screen missing red		ANDRE LUIS FELDMANN
CCE	HPS-1407	Return lines	Modified kinescope board resistor fr901 22r 1w	Measure the abl voltage oscillating correct stable	MARCOS MELO CASCAVEL CE