Cce Repair Tips

Search: cce
Results: 4824

Make	Model	Symptom	Problem	Solution	By
CCE	2991	LED comes on and doesn't turn on	Exchange c 409		antonio nobrega(patos.pb)
CCE	HPS2901	Turns on with sound and without image	Ci 8177 just exchange good luck		This email address is being protected from spambots. You need JavaScript enabled to view it.
CCE	HPS1470 Q ..	TV with dark bars on the sides and vertical white lines; when the signal comes in, the image and normal sound distort.	R-427=4k7 was open.	It was replaced and it was... ok.	Armando
CCE	HPS-14R	No high voltage	C 404 - 330 pf 2kv
CCE	HPS 1402 E	No image, only sound, +b with only 33v, does not generate high	C 825 47mfx160v sold out		Manoel
CCE	HPS 2002D	Vertical with stripe from bottom to top in the middle. and with line in the rest of the image.	C425 with loss of capacitance.	Be careful, sometimes the d301 malfunctions.	Tec Vídeo
TV CCE	HPS1405B	Does not oscillate, filament off.	Cold solder on pin one of the fly-back.	It was just resoldering and it was ok.	Armando
CCE	HPS- 1402B	Does not turn on b+ 123v normal	Horizontal trafo Just change it	If all technicians are aware of putting out tips, it will help you. hug good luck ass: arni	ELETRONICA ARNI, LEOBERTO LEAL-SC
CCE	HPS-2091	TV had all voltages ok. There was 125v on the b+ of the fla back but when the TV was turned on it dropped the +b voltage to 70 volts.	The bad 100mf /160v supply capacitor	I replaced it and it was left	This email address is being protected from spambots. You need JavaScript enabled to view it.
CCE	HPS 1402F	Cutting high oscillator	Replace q 802		jps. elet. cg
CCE	HPS-2071	Turns on, but keeps turning off, image shrunken on all sides.	Shaqqikh (47/160)		Dudi
CCE	HPS1471	Blinking LED, does not oscillate horizontally	Cap. 808 (22ufx25v)		pardalzito
CCE	HPS2185	Turns on, but with return lines and a reduced frame on the sides and turns off, on, off...	-c825 seco (47x160v		MAIRES
CCE	HPS2971	Return lines, does not turn off, no image and osd-	+b is missing from the rgb output - see r901(22r)		MAIRES
CCE	HPS 3385	Vertical closed	Transistor q 802 power supply of 8v and 8v8 - without these power supplys the vertical oscillator of the ic - 501 will not work	Replaced the q 802 bc 337 - solves the problem that appears if the ci vertical but is not	eletronicanylsom
CCE	HPS1471	Does not tune channels	R109 (12k)	Replace and check r106, r107, r108	Santofofo
CCE	HPS 2997 FS	Very high power supply +b giving 190 volts - the normal is 132.5	Diodo zener 811 10volts	081- 9471-3463	This email address is being protected from spambots. You need JavaScript enabled to view it.
CCE	HPS2991FS	Turns on after a few seconds, turns off and on by itself	Transistors 805 and 802 without gain	Replace for 2 that have better gain	nonato
CCE	HPS1481A ***	LED on, not starting	D407=in4007...common	It was open; it was replaced and everything was ok.	Armando
CCE	HPS2991	LED blinking very faintly, power supply without power	Change c816		MAIRES