Cce Repair Tips
Search: cce
Results: 4816
Results: 4816
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
CCE |
HPS 207S
|
Nothing turns on, main capacitor getting charged. | Electrolytic capacitor of 47u by 25vts in position 812. | Eletronica casa dos monitores itumbiara goias | |
CCE |
TV29USP
|
Comes and cuts, keeps hitting the relay | 330/2kv c402 with leakage | Replace of c402, d411 in4148 and r401 18k which was toast | jasvan souza |
CCE |
HPS1473
|
Sometimes it doesn't turn on and the LED stays off | Sem +3.3v no pino 66 do micro | L707 opening | jasvan souza |
CCE |
HPS-2198AV
|
Crazy TV turned on, turned off crazy volume and changing channels | Leaky on off key | Replace key sw701 | Resistronic resende |
CCE |
HPS-21AVP
|
Crazy functions | Micro power switch with leakage | Replace micro keys for new ones | ELETRONICAESP2000 |
CCE |
HPS-2002D
|
Black screen with three rgb lines at the top of the screen | Cap 47mf/160v, filtro do +b | ||
CCE |
HPS-21AVP
|
Dark bar on the side of the image | C417 (330pf/2kv próximo ao flay back) | Barter it | MARCONDES LIMA,Jaicós-PI- Brasil |
CCE |
HPS2706
|
Images feixada xuvicado and with right sway | X502 | Replace x502 | |
CCE |
HPS 21FS
|
Doesn't start | Capacitor c 829 33 mf / 160 v c 825 47 mf / 160 | karlos | |
CCE |
HPS 2985
|
Image varying as if the screen were increasing and decreasing | R441 and 442 for warranty I replaced them both | ||
CCE |
HPS 2981
|
Stand by LED is on, activating power does not turn off, that is, it does not respond, the relay does not arm. | Burnt fly back and memory. | JOHNSON | |
CCE |
HPS1470P
|
Burning the ci tda3653b | Capacitor c 306 100uf 25v. | Replace it and run for the hug. | altair santos |
CCE |
HPS2997FS
|
TV turns on but the image with colored dots at the top of the tube does not appear | C409 as lack of capacitance | Replace and analyze but some components | ELETRONICA MEDEIROS |
CCE |
HPS2185
HPS2185 |
Volume all turned up won't go down | Tda 9570 processor | edson ou tinho | |
CCE |
HPS-2007-1407C
|
LED blinking and doesn't turn on +b128v normal normal power supply | R411=8k2 open | Replace r411 | beto2828 |
CCE |
HPS2910C
|
It worked for a few minutes and changed channels, lowered the volume and entered AV randomly. | After checking the keys and the remote control receiver without finding any problems, I removed the 150pf x 50v circuit c761 and the defect was corrected. I left it without the capacitor. | Paulorusso | |
CCE |
HPS1402
|
Standby LED flashing | Toocar o c812 de 47mf/25 | julio.sertemaq | |
CCE |
HPS 2071
34B1 |
TV doesn't work q804 was open, works 12 hours and returns, | Changed flyback I put tat: 2009 change c 1 2 nf for 8k2 2kv it was fine, | TV is working without heating everything, okay? | luiztvsom |
CCE |
TV29USP
|
Turns on and then turns off | I felt a burning smell, I noticed the charred c402, I changed it and the TV had the image shifted to the right, I followed and saw the charred r401, I changed it and the TV was ok | Eliel Magno | |
CCE |
HPS2185FS
|
Enter service mode for adjustment, everyone makes mistakes at this time. | Turn on the SW700 key which is located next to the touch keys on the TV's front panel (keyboard). Don't leave the key on directly, try turning it on and off until it enters the mode, observe that when you turn on the key the LED flashes. | RBELETRONICA2010 |