☰

Cce Repair Tips




AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: cce
Results: 4824
Make Model Symptom Problem Solution By
CCE HPS2997FS
TV turns on but the image with colored dots at the top of the tube does not appear C409 as lack of capacitance Replace and analyze but some components ELETRONICA MEDEIROS
CCE HPS2185
HPS2185 		Volume all turned up won't go down Tda 9570 processor edson ou tinho
CCE HPS-2007-1407C
LED blinking and doesn't turn on +b128v normal normal power supply R411=8k2 open Replace r411 beto2828
CCE HPS2910C
It worked for a few minutes and changed channels, lowered the volume and entered AV randomly. After checking the keys and the remote control receiver without finding any problems, I removed the 150pf x 50v circuit c761 and the defect was corrected. I left it without the capacitor. Paulorusso
CCE HPS1402
Standby LED flashing Toocar o c812 de 47mf/25 julio.sertemaq
CCE HPS 2071
34B1 		TV doesn't work q804 was open, works 12 hours and returns, Changed flyback I put tat: 2009 change c 1 2 nf for 8k2 2kv it was fine, TV is working without heating everything, okay? luiztvsom
CCE TV29USP
Turns on and then turns off I felt a burning smell, I noticed the charred c402, I changed it and the TV had the image shifted to the right, I followed and saw the charred r401, I changed it and the TV was ok Eliel Magno
CCE HPS2185FS
Enter service mode for adjustment, everyone makes mistakes at this time. Turn on the SW700 key which is located next to the touch keys on the TV's front panel (keyboard). Don't leave the key on directly, try turning it on and off until it enters the mode, observe that when you turn on the key the LED flashes. RBELETRONICA2010
CCE HPS-2997FS
Doesn't even turn on the stand by LED Ic 801 tea 1507 p Replace tea 1507 p juci
CCE HPS2071A
Dead power supply Replace o ic801 tea1533at, r812 0.22,q801 tpf6nk90z julio.sertemaq
CCE HPS2071A
Dead power supply Ci do vertical , la78040 julio.sertemaq
CCE HPS2004B
LED flashes quickly, has +b and TV does not turn on. with some noise at the power supply Capacitors c806, c807 (4.7u/100v) and c812 (47u/25v) Replace capacitors Eletrônica Staub
CCE HPS2780
Horizontal output transistor burns Check c401 Edson - SP
CCE TVS2910
Television burned by lightning has current in the +b and LED is off Replace diodes d808 and d812 in the power supply Oh and just calling it was 100% ELETRONICA AUTO TREVO
CCE HPS2991FS
When connecting to the network, the chopper keeps ticking, ticking, and the LED lights up after a while and when turning it on, the power supply keeps arming and disarming. Swap c806 and c839 (104k and 471) ceramic. joaomvjr
CCE HPS1497
Horizontal reaches to the side, shaking the image C417 (330pf/2kv is in line with (hsyn) horizontal synchronism) Barter it MARCONDES LIMA,Jaicós-PI- Brasil
CCE 2781/2981
Vertical closed/no sound Ic 502 la 7685 as irregularities Replaced ci 502 la 7685; the TV was ok. clayton
CCE HPS2071
Image darken Capacitor c424 de 47n seu nem eletronica
CCE TLCD-32X
With a loud noise from the speaker Resolder smd resistors on the amplifier part. In my case it resolved. ELTON DE CASTRO -EMBU DAS ARTES -SP
CCE HPS1401
Works well for a while and then starts turning off and on again, sometimes the sound is very loud Replace of: c722, c723 and ic 803 NV ELETRONICA - VALDEMIR